KRASKO
Polimerstoun-2 SLIM — polyurethane primer-enamel for concrete floors
Two-component polyurethane primer-enamel for wear-resistant painting of concrete floors indoors; adhesion to concrete from 2.5 MPa.
Price on request
KRASKO
Epoksol — water-epoxy primer-impregnation with antiseptic
Epoksol contains no organic solvents, is non-flammable and odourless, which is why the manufacturer recommends it for children’s, pre-school and medical facilities. The impregnation penetrates concrete up to 5 mm, forms a vapour-permeable waterproof layer and, thanks to its antiseptic components, neutralises mould and fungus. It serves as a primer for Epostoun and Epostoun-Ultra water-epoxy enamels, and waterborne finish coats can be applied after just 3 h.
Specifications
| Manufacturer | KRASKO — OOO “NPO KRASKO”, Moscow Region |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | production halls, warehouses and logistics, food and pharmaceutical, wet rooms, retail and public |
| Base | Two-component water-epoxy primer-impregnation: epoxy resin with antiseptic active components and functional additives, water; free of organic solvents |
| Colour | Colourless |
| Packaging | 20 kg (available from one package) |
| Application method | Priming and protection of concrete floors, concrete and brick walls in dry and wet rooms. No thinning; standing time after mixing at least 10 min; 1–3 coats by brush, roller or air spraying onto a dry cleaned surface; interval between treatments 3–24 h at 20 °C; waterborne finish coats — after 3 h at 20 °C, but no later than 2 days; solvent-borne ones — after the surface moisture has dropped to the standard level (usually at least 7 days). Systems with Epostoun, Epostoun-Ultra and Betolast water-epoxy self-levelling floor. |
| Application temperature | not below +5 °C (surface and air) |
| Curing | Recoat interval 3–24 h at 20 °C; waterborne coatings — after 3 h |
| Key properties | Pot life after mixing at least 4 h; standing time after mixing at least 10 min; penetration depth up to 5 mm; non-flammable (free of organic solvents); vapour-permeable (“breathable”) waterproof layer |
| Consumption | First treatment — 300–400 g/m² (concrete M200–M350); repeat treatment — 100–200 g/m² |
| Shelf life | 12 months from the date of manufacture; storage from +5 °C to +35 °C |
| Standards | TU 20.30.11-005-01524656-2017; expert opinion; preparation to SP 29.13330.2011 and SP 71.13330.2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KRASKO
KRASKO
Akvastoun-2MS — water-polyurethane primer-impregnation for concrete
Odourless water-polyurethane primer-impregnation for old, friable and damp concrete; penetrates the substrate up to 10 mm.
Price on request
KRASKO
Teksipol Ekspert Antistatik — antistatic primer-enamel for concrete floors
Static-dissipative one-component primer-enamel for concrete floors and reinforced concrete in explosive areas, flammable-liquid stores, electronics plants.
Price on request
KRASKO
Epoksipol-2 — epoxy self-levelling floor for damp concrete
Self-levelling epoxy floor without organic solvents that can be laid on fresh concrete with a moisture content of up to 15 %.
Price on request
KRASKO
Epolast — solvent-free epoxy self-levelling floor
Two-component odourless, solvent-free epoxy self-levelling floor for food, pharmaceutical, retail and production premises.
Price on request
KRASKO
Proteksil — deep-penetrating strengthening impregnation for concrete
Clear dustproofing impregnation for new, old and low-grade concrete; penetrates up to 10 mm and can be applied at temperatures down to −20 °C.
Price on request