LEVL (INGRI)
LEVL Coat 151 — polyurethane primer under polyurethane floors
One-component primer-impregnation for concrete and metal before LEVL polyurethane coatings; applied at temperatures from −10 °C.
Price on request
LEVL (INGRI)
LEVL CemPol 10 — cementitious floor for heavy vehicle traffic
Ports, container yards, loading and unloading areas and car parks are the main field of application of LEVL CemPol 10. The stiff Portland cement mortar is laid wet-on-wet over a LEVL Prime Concrete bonding layer, levelled with a straightedge and floated by machine; falls can be formed with it. After 28 days compressive strength is at least 60 MPa, abrasion up to 0.4 g/cm², bond to substrate from 2 MPa, frost resistance at least F1 200. A natural and four coloured versions are available.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, car parks and ramps, outdoor areas |
| Base | Portland cement, modifying additives |
| Colour | natural, light grey, red, green, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner; 2.0–2.5 kg of water per bag |
| Application method | stiff mortar mix over a LEVL Prime Concrete bonding layer, wet-on-wet; straightedge + floating with a power trowel; falls can be formed; new floors and repair of old ones |
| Application temperature | air and substrate +5…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 60 minutes; light loads: +10 °C ~14 days, +20 °C ~7 days, +25 °C ~3 days; full strength gain ~28 / ~14 / ~7 days |
| Key properties | Compressive strength after 28 days at least 60 MPa; abrasion (wear) no more than 0.4 g/cm²; bond to substrate at least 2 MPa; frost resistance at least F1 200; mechanical loads: significant; service temperature from −40 °C to +60 °C; maximum aggregate size 7 mm |
| Layer thickness | from 15 to 50 mm (optimum from 20 mm) |
| Consumption | 2.1 kg/m²/mm (approximate) |
| Shelf life | 12 months; do not freeze |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST 13087, GOST 31356, GOST 10060; declaration ROSS RU D-RU.RA01.V.25307/19; SGR RU.77.01.34.008.E.000244.02.19 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 310 — epoxy self-levelling floor, class KM1
Self-levelling epoxy coating with a certified fire hazard class KM1 for warehouses, car parks, schools and healthcare facilities.
Price on request
LEVL (INGRI)
LEVL Coat 154 Rapid — fast-drying polyurethane primer
One-component primer-impregnation for concrete and metal under polyurethane floors; next coat at +20 °C after just 3 hours.
Price on request
LEVL (INGRI)
LEVL Coat 104 RAPID — fast epoxy primer for polymer floors
Epoxy primer with accelerated curing under LEVL floors: foot traffic after 6 hours, full strength in about 12 hours at +20 °C.
Price on request
LEVL (INGRI)
LEVL Coat 304 RAPID — fast-curing epoxy self-levelling floor
Coloured epoxy self-levelling floor for warehouses, workshops and car parks that takes full load after about 12 hours at +20 °C.
Price on request
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request