LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.

LEVL RemTixo universal repair mix restores concrete and the concrete cover of structures, fills joints when making them monolithic, and suits both floors and vertical surfaces. The cement compound with polymer fibre is applied by hand or by machine and then covered with film or hessian or treated with LEVL Cure 100. After 7 days compressive strength is at least 45 MPa, after 28 days 50 MPa, flexural 10.6 MPa; bond to substrate from 1.5 MPa. Packaging: 25 kg bag.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, warehouses and logistics |
| Base | dry cement mix with polymer fibre |
| Packaging | 25 kg paper bag with inner polyethylene liner |
| Application method | repair of horizontal and vertical surfaces, restoration of concrete and the concrete cover, grouting of joints; by hand or by machine; curing: film/hessian/LEVL Cure 100 |
| Application temperature | +5…+30 °C (ambient and substrate); concrete at least B22.5 |
| Key properties | Compressive strength at least 45 MPa (7 days) / 50 MPa (28 days); flexural at 28 days 10.6 MPa; bond at least 1.5 MPa; density 2300 ± 100 kg/m³; service temperature from minus 40 to plus 60 °C; not acid-resistant |
| Layer thickness | 5–30 mm (not less than 5 and not more than 30 mm) |
| Consumption | 2 kg of dry mix per 1 m² at a thickness of 1 mm (theoretical) |
| Shelf life | 12 months; storage at +5…+30 °C |
| Standards | TU 5745-025-94613022-10 with Amendment No. 1; GOST 310.4, GOST 31356, GOST 5802; not subject to fire certification (Decision No. 00134R-05/13) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.
Pourable non-shrink mix for concrete repair and grouting of equipment foundations; 8 MPa compressive strength after just one hour.
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Colourless UV-resistant varnish protecting polymer floors, including those with coloured flakes; gloss no more than 10 GU, hides minor defects.
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Self-levelling epoxy coating for warehouses, workshops and laboratories exposed to chemicals; fire hazard class KM2.