LEVL (INGRI)
LEVL Coat 501 — clear epoxy binder for decorative floors
Binder for floors and screeds with coloured quartz sand: clear, gloss, chemically resistant; fire hazard class KM2.
Price on request
LEVL (INGRI)
LEVL RemTixo Grout 400 SF — ultra-fast pourable repair compound, class R4
Just 40 minutes after placement LEVL RemTixo Grout 400 SF reaches 3 MPa in compression, after an hour 8 MPa, after 2 hours 15 MPa, and after 28 days at least 45 MPa. The pourable non-shrink mix is used for repairing concrete and reinforced concrete, grouting equipment foundations and forming horizontal bases. Under GOST R 56378 it belongs to repair mortar class R4; water impermeability W16, bond to substrate 2.5 MPa. Service range from −50 to +70 °C.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, warehouses and logistics |
| Base | special cements, modifying additives, polymer fibre (pourable, non-shrink, ultra-rapid-hardening) |
| Colour | grey |
| Packaging | 25 kg bag with inner polyethylene liner; 2.9–3.1 kg of water per bag |
| Application method | pourable repair and restoration of concrete and reinforced concrete, grouting of equipment foundations, forming of horizontal bases; onto a rough substrate saturated with water; curing: film/hessian/LEVL Cure 100 |
| Application temperature | air +5…+20 °C; substrate +5…+25 °C; material −15…+35 °C |
| Curing | pot life at +20 °C 15 minutes; compressive strength 3 MPa after 40 minutes, 8 MPa after 1 hour, 15 MPa after 2 hours, 30 MPa after 24 hours |
| Key properties | Repair mortar class R4; compressive strength at least 3 / 8 / 15 / 30 / 45 MPa (40 min / 1 h / 2 h / 24 h / 28 days); flexural 1.5 / 2 / 4 / 6 MPa (1 h / 2 h / 24 h / 28 days); bond at least 2.5 MPa; W16; F2 400; service temperature from −50 °C to +70 °C |
| Layer thickness | 10–100 mm |
| Consumption | 2.1 kg/m²/mm; 21.00–210.00 kg/m² for 10–100 mm |
| Shelf life | 12 months |
| Standards | TU 23.64.10-090-94613022-2021; GOST R 56378-2015 (class R4); GOST 30744, GOST R 58277, GOST 12730.5, GOST 10060 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 070 — catalyst for LEVL methyl methacrylate floors
Powder polymerisation catalyst for LEVL Coat 171, 271 and 573 carboacrylate materials; the dosage depends on temperature.
Price on request
LEVL (INGRI)
LEVL CemPol 20 — rapid-hardening self-levelling cementitious floor
Self-levelling finishing floor on special cements for workshops, warehouses and car parks; foot traffic after 2–4 hours, strength 50 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL Coat 351 AS — antistatic polyurethane self-levelling floor
Smooth antistatic PU coating with chemical resistance and combustibility group G1 for chemicals, hangars, electronics and laboratories; 10⁶–10⁹ ohm.
Price on request
LEVL (INGRI)
LEVL Base 100 — dispersion for a bonding layer over old concrete
Aqueous styrene-butadiene dispersion for a contact layer between old concrete and cement mortar and for gauging LEVL CemPol 10.
Price on request
LEVL (INGRI)
LEVL Coat 111 — epoxy impregnation for hardening concrete
Two-component epoxy impregnation for dustproofing and hardening porous mineral substrates; adhesion to concrete over 4.0 MPa.
Price on request