Nuclear power plant units under construction and reconstruction and special-purpose facilities are the main application area of Lider SP. It is a two-component composition based on epoxy resin with a hardener; the coating is resistant to degassing and decontamination agents and is suitable for use in the open atmosphere. The fire resistance rating of steel structures is R up to 90, and the material can be applied at temperatures down to −5 °C. The service life is at least 25 years.
| Manufacturer | KrilaK — NPO “Association KrilaK” |
|---|---|
| Fire protection performance | R up to 90 |
| Application | steel structures |
| Service conditions | nuclear power plant units under construction and reconstruction, special-purpose facilities; open atmosphere permitted; from −50 to +60 °C |
| Base | two-component: fillers in epoxy resin + hardener; solids content 82 % |
| Colour | white |
| Application method | airless spray (Wagner-type), roller, brush |
| Application temperature | permitted down to −5 °C |
| Compatible primers and topcoats | primer Akrilak EP Primer; decorative topcoat Akrilak Finish |
| Shelf life | storage from −5 to +40 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based fire-retardant paint for load-bearing concrete and reinforced concrete structures, fire resistance up to 180 min, with a levelling effect.
Fire-protective cable coating for 100 % humidity and precipitation at NPPs, chemical plants and in the fuel and energy sector; RP1, D1, V1, T1.
Thick-film sprayable two-component polymer-based material for steel fire protection, group 1 per GOST R 53295-2009.
Mineral fire-protective mix for steel structures, R up to 240, group 1 per NPB 236-97, including hydrocarbon fire.
Non-combustible board of pressed superfine fibres for fire barriers, cable penetrations, air ducts and structures, REI up to 240.
Fire protection system for vaults and walls of transport tunnels: Monolit compound, reinforcing mesh and topcoat, REI up to 240.
