OGNEZA-PO-PROF fire-retardant impregnation (solution)
Clear water-soluble impregnation for timber without decorative finish — rafters, roofs, scaffolding; groups I and II per GOST R 53292.

The dry version of OGNEZA-PO-T is a concentrate that is diluted with water at a temperature of at least 15 °C at a ratio of 1:3. The resulting solution is used to treat fabrics made of cotton, cotton-polyester and synthetics, as well as carpets, by spraying or dipping, after which the material becomes hard-to-ignite per GOST R 50810-95. The concentrate can be stored for up to 20 years at temperatures from −60 to +80 °C. It is supplied in paper or polypropylene bags of 25 kg.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | hard-to-ignite per GOST R 50810-95 |
| Application | fabrics, roofing and other materials |
| Service conditions | fabrics (cotton, cotton-polyester, synthetics) and carpets |
| Base | dry concentrate, diluted with water (t ≥ 15 °C) 1:3 |
| Packaging | 25 kg (paper or polypropylene bags) |
| Application method | spraying, dipping |
| Application temperature | from +5 to +35 °C |
| Drying | up to 24 h (spraying), up to 48 h (dipping); between coats 2 h |
| Shelf life | 20 years |
| Standards | GOST R 50810-95; state registration certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Clear water-soluble impregnation for timber without decorative finish — rafters, roofs, scaffolding; groups I and II per GOST R 53292.
Non-combustible (NG, KM0) one-component mastic for fire protection of bituminous and acrylic roof waterproofing layers, seams and joints.
Fire protection of air ducts with PMBOR foil-faced basalt mat on OGNEZA-K adhesive or OGNET mastic; ratings from 60 to 240 minutes.
Concentrate for preparing a fire and bio-protective timber impregnation: groups I and II per GOST R 53292, for use indoors and outdoors without precipitation.
Modular cable penetration with a removable cover: cables are added and removed without dismantling; for walls and floors, including gypsum fibre board walls.
Split steel collar with an intumescent insert for plastic pipes in walls and floors; EI 180, up to EI 240 according to the manufacturer.