Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
POLITON-UR (UV) grade A — UV-resistant acrylic urethane finish enamel
VMP

POLITON-UR (UV) grade A — UV-resistant acrylic urethane finish enamel

Polyurethane enamels

POLITON-UR (UV) grade A finish enamel is an acrylic urethane on an aliphatic polyisocyanate hardener, resistant to ultraviolet radiation. It is tinted to the RAL catalogue and produced in gloss, semi-gloss, matt and deep matt versions. It serves as the top coat over IZOLEP-mastic, IZOLEP-mio, FERROTAN, POLITON-UR and over PLAMCOR fire protection for categories C1–C5 and CX per GOST 34667; heat resistance is +120 °C continuously. It is applied from −10 °C, is permitted in premises with wet disinfection and has an approval for agro-industrial facilities.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typepolyurethane enamels
Usesteel structures, concrete, bridges, oil and gas, chemical plants
Baseacrylic urethane; base and aliphatic polyisocyanate hardener, two-pack; UV-resistant
Colourto the RAL catalogue; gloss (G), semi-gloss (SG), matt (M), deep matt (DM)
Packagingbase — metal pails 20 l, hardener — metal pails 3 l
Application methodairless spray (nozzle 0.011–0.015″, 9–15 MPa), air spray, brush, roller; thinner SOLV-UR or petroleum solvent up to 5 % by weight; base:hardener (semi-gloss) 9:1 by weight, 7:1 by volume (RAL 9006 — 7.8:1 and 7.5:1); for bright orange, red and yellow colours — 2 coats
Application temperatureair from −10 to +40 °C (from +5 to +30 °C recommended), relative humidity max. 85 %; surface at least 3 °C above the dew point, not above +40 °C; enamel not below +15 °C
Key propertiescorrosivity categories C1–C5, CX per GOST 34667; service from −60 °C, coating class per GOST 35094 — not higher than IV (G, SG), V (M, DM), heat resistance — +120 °C continuously, +150 °C short-term, non-volatile matter by weight — 60.0–73.0 %, volume solids — 54±2 %, density — 1.35±0.10 g/cm³ (G, SG), 1.40±0.10 g/cm³ (M, DM), pot life at 20 °C — at least 2 h
Compatible materialsfinish over IZOLEP-mastic, IZOLEP-primer, IZOLEP-mio, VINIKOR-ecoprime-01, FERROTAN, POLITON-UR and other epoxy and polyurethane materials; finish over PLAMCOR fire protection
Shelf life24 months from the date of manufacture
StandardsTU 20.30.12-033-12288779-2018; GOST 9.401-2018; RD GM-02-18 (Trust “Gidromontazh”); PJSC MMC Norilsk Nickel; STO-01393674-007-2022, STO-01393674-008-2024 (TsNIITS); STO 12288779-001-2020 (SC Avtodor); TR 12288779.02073.00007 (TsNIIS); complies with the normative documents (ND) of Gazprom, Transneft, Rosneft, Lukoil, Irkutsk Oil Company, Surgutneftegas, Gazprom Neft; certificates for systems with PLAMCOR-2, -3, -4, -5, -6; approval for agro-industrial facilities

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP