PLAMCOR-602 thermal insulation layer for indoor fire protection (VMP)
One-pack syntactic foam on acrylic and chlorinated resins — a thermal insulation layer under PLAMCOR-2 for steel indoors.

The main distinction of PLAMCOR-303 is that it is designed not only for metal but also for reinforced concrete, and it combines protection against fire and corrosion. The base is epoxy and the hardener is an aliphatic polyamine; the coating is intumescent and suits all atmosphere types, including the open industrial atmosphere. Service life in the open atmosphere is at least 30 years. EAEU certificates (including EAEU KZ), NSOPB certificates and a seismic resistance certificate are available.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Application | steel structures, concrete and reinforced concrete |
| Service conditions | macroclimatic regions U, UKhL, KhL, all atmosphere types and placement categories per GOST 15150, incl. open industrial atmosphere |
| Base | epoxy base + aliphatic polyamine hardener; intumescent, two-pack |
| Colour | grey (shade not standardised) |
| Packaging | base — 20 l metal bucket, hardener — 3 l |
| Application method | airless spray (nozzle 0.031–0.047″, ≥ 25 MPa), brush/roller |
| Application temperature | from −5 to +40 °C, relative humidity ≤ 80 %; the material itself — not below +15 °C |
| Drying | to degree 3 — no more than 6 h (20 °C); before enamel — no more than 1 month |
| Compatible primers and topcoats | enamels POLITON-UR (UV), VINIKOR-62, ALISTERUS 3105, polyurethane, vinyl-epoxy |
| Shelf life | 24 months |
| Standards | TU 20.30.22-145-12288779-2023; GOST 15150; GOST 9980.5; GOST 19007; EAEU certificates (incl. EAEU KZ), NSOPB; seismic resistance certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
One-pack syntactic foam on acrylic and chlorinated resins — a thermal insulation layer under PLAMCOR-2 for steel indoors.
One-component direct-to-metal primer-enamel for ships, railway wagons and steel structures; applied in frost down to −25 °C.
Epoxy primer-enamel with 95 % solids for the underwater hull of icebreakers, berths and locks; service down to −70 °C.
Epoxy primer-enamel with corrosion inhibitors for freight wagons and steel structures in aggressive environments; included in GOST 7409-2018.
Surface-tolerant epoxy primer for ships and hydraulic structures; over steel, non-ferrous metals, fibreglass and concrete.
Two-component acrylic urethane finish in any RAL colour for steel structures, bridges and concrete in categories C1–C5 and CX.