TECHNONICOL No. 24 (MGTN) waterproofing mastic — bituminous, for foundations
Cold bituminous mastic for concrete, reinforced concrete and timber structures buried in the ground; applied at −20…+40 °C, not for roofs.

ECOBASE V-ST serves as the second layer in two-layer PVC membrane waterproofing of underground structures. One of its sides has a textured surface of profiled studs or embossing, and the system itself allows leak-tightness to be monitored during construction and service. The membrane is made of extruded PVC without reinforcement, elongates by 200% ±20%, retains flexibility on a bar down to −40 °C and is absolutely watertight at a pressure of 1 MPa for 24 h. Rolls of 20 × 2.15 m are packed in opaque film.
| Manufacturer | TECHNONICOL — OOO “Zavod Logicroof”, Ryazan |
|---|---|
| Type | roll materials and membranes |
| Use | foundations and basements |
| Base | unreinforced polymer membrane of extruded PVC with fillers and process additives; textured surface (profiled studs or embossing) on one side |
| Packaging | rolls 20 m × 2.15 m, each in opaque polyethylene film, on wooden pallets |
| Application method | second waterproofing layer in two-layer PVC membrane systems for underground structures; allows leak-tightness to be monitored during construction and service |
| Key properties | maximum tensile force lengthwise at least 12 MPa, crosswise at least 10 MPa (GOST 31899-2-2011, method B); elongation 200% ±20%; flexibility temperature on a bar R = 5 mm not higher than −40 °C; nail-shank tear resistance at least 150 N; change in linear dimensions at 80 °C over 6 h not more than 2%; static puncture resistance at least 20 kg; welded seam peel strength at least 300 N/50 mm, tensile strength at least 600 N/50 mm; watertightness at 1 MPa for 24 h — absolute; impact resistance on a hard substrate at least 700 mm, on a soft substrate at least 1000 mm (GOST 31897-2011); water absorption not more than 0.2% |
| Layer thickness | 1.5 mm |
| Shelf life | 12 months from the date of manufacture; store rolls horizontally on a pallet, not more than 3 high, in the factory packaging, in a dry enclosed room or under a canopy |
| Standards | STO 72746455-3.4.3-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Cold bituminous mastic for concrete, reinforced concrete and timber structures buried in the ground; applied at −20…+40 °C, not for roofs.
Unreinforced PVC membrane with a yellow signal layer for foundations, metro tunnels and inverted roofs; watertight at 1 MPa.
Solvent-free bitumen-polymer paste for foundations and floors inside residential premises; watertight after 8 h, can be diluted with water.
Hot mastic of bitumen and crumb rubber for protection of underground pipelines, roof joints and structures in the ground; four grades.
Cold bitumen-rubber mastic for mastic roofs, roof repair and foundation waterproofing; elongation at least 500%, flexibility at −35 °C.
Hot bitumen-polymer mastic for roof repair and construction, bonding rolls and coating underground structures; elongation at least 1100%.