TECHNONICOL
LOGICBASE V-SL (S) PVC waterproofing membrane — with signal layer
Unreinforced PVC membrane with a yellow signal layer for foundations, metro tunnels and inverted roofs; watertight at 1 MPa.
Price on request
TECHNONICOL
MBR hot bitumen-rubber mastic (grades 65, 75, 90, 100) — GOST 15836-79
MBR is produced to GOST 15836-79 from petroleum bitumen, crumb rubber and plasticiser, and the grade number — 65, 75, 90 or 100 — corresponds to the minimum softening point in degrees. The mastic, heated to 160–180 °C, is applied in one coat to a primed substrate. It is used to insulate underground steel pipelines and structures against soil corrosion, fill joints and cracks in roofs, bond roll materials and vapour barriers, and waterproof culverts, retaining walls and supports. Water saturation over 24 h is not more than 0.2%; packaging — 14 kg boxes or 25 kg bags.
Specifications
| Manufacturer | TECHNONICOL — OOO “Zavod Technoflex”, Uchaly |
|---|---|
| Type | mastics and liquid membranes |
| Use | foundations and basements, roofs |
| Base | hot-applied multi-component mass: petroleum bitumen, crumb rubber, plasticiser |
| Packaging | 14 kg siliconised cardboard boxes; 25 kg paper bag with a siliconised inner layer |
| Application method | heat to 160–180 °C, apply in liquid form to a substrate primed with bitumen primer by spatula, brush or by pouring and spreading, in 1 coat |
| Application temperature | application temperature ranges by grade: from +35 to −5; from +40 to −5; from +5 to −15; from +5 to −30 °C (GOST 15836-79); heating temperature 160–180 °C |
| Key properties | ring-and-ball softening point not lower than +65; +75; +90; +100 °C (by grade); needle penetration at 25 °C at least 15; 20; 30; 40×0.1 mm; ductility at 25 °C at least 3; 4; 5 cm (GOST 15836-79); density 1–1.2 g/ml (GOST 31992.1-2012); water saturation over 24 h not more than 0.2% (GOST 9812-74); combustibility group G4, ignitability V3, flame spread RP4 (GOST 30444-97) |
| Layer thickness | waterproofing coating at least 3 mm in 1 coat |
| Consumption | 2.5–3.5 kg/m² |
| Shelf life | 18 months; store in a dry place protected from light at −20…+30 °C |
| Standards | GOST 15836-79; GOST 30693-2000 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by TECHNONICOL
TECHNONICOL
AquaMast polymer waterproofing under tiles — for bathrooms and WCs
Solvent-free polymer paste for waterproofing floors and walls under tiles and underfloor heating in bathrooms, WCs and on balconies; elongation from 250%.
Price on request
TECHNONICOL
TECHNONICOL EM-260/20, EM-260/50, IM-240/20, IM-260/50 expansion-joint waterstops — PVC
PVC waterstops for expansion joints of underground reinforced concrete structures: external EM and internal IM, expansion section 20 or 50 mm.
Price on request
TECHNONICOL
TECHNONICOL IC-125-2-SP waterstop — internal, with swelling profile
Internal PVC waterstop with a swelling profile for “slab — wall” and “floor slab — wall” cold joints; two-level protection against water.
Price on request
TECHNONICOL
LOGICBASE V-ST PVC waterproofing membrane — textured, for the second layer
PVC membrane with a textured surface for the second layer of two-layer waterproofing systems for underground structures with leak-tightness monitoring.
Price on request
TECHNONICOL
TECHNONICOL waterstops for construction joints EC-220, EC-320-4, IC-240-2, IC-240-6
PVC waterstops for construction joints of underground structures and tunnels: external EC and internal IC, elongation at break 300%.
Price on request