Wetisol (INGRI)
WETISOL Ecto 1K Hard — rigid coating waterproofing
Cementitious coating waterproofing for tanks, pools and foundations without movement: W16 under positive and W8 under negative pressure, bond from 1.7 MPa.
Price on request
Wetisol (INGRI)
WETISOL S Clean — flushing and preservation of spraying equipment
WETISOL S Clean removes residues of isocyanates and polyetheramines from spray waterproofing rigs and lubricates them at the same time. The compound is used to flush equipment before work after a long downtime, to preserve it at the end of work, and to clean pumps and tools after WETISOL I-5115, I-5020, I-5137, I-5107 FG injection resins and S-MP primers. The benzoate- and glutarate-based liquid is low-toxic, biodegradable and safe for rubber and plastic parts; its flash point is 214 °C. Packaging — 5, 20 or 25 kg.
Specifications
| Manufacturer | Wetisol (INGRI) — OOO “Ingri” |
|---|---|
| Type | waterproofing material |
| Base | system based on benzoates and glutarates |
| Colour | transparent colourless liquid with a slight odour |
| Packaging | 5, 20 or 25 kg |
| Application method | removal of isocyanate and polyetheramine residues from spray waterproofing rigs and their lubrication; flushing before work after a long downtime (leak check, pump lubrication) and preservation of equipment after work; cleaning of pumps and tools after WETISOL I-5115, I-5020, I-5137, I-5107 FG injection resins and S-MP primers; shake for 2–3 min before use without opening; flush until the components are completely displaced, then drain and fill the rig with clean S-Clean |
| Key properties | density (20 °C) 0.970 g/cm³; flash point 214 °C; auto-ignition temperature over 350 °C; vapour pressure (20 °C) less than 0.001 kPa; solubility in water insignificant; viscosity (20 °C) 108 mm²/s; low-toxic and biodegradable; safe for rubber and plastic parts; lubricating properties |
| Consumption | about 10–12 l at a pump output of 3.4 l/min, hose length of 15 m and temperature of +10…+20 °C (depends on hose length, pump type and weather) |
| Shelf life | 1 year from the date of manufacture in unopened undamaged original containers, preferably at +10…+20 °C |
| Standards | toxicity — class 3 per GOST 12.1.005-88 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Wetisol (INGRI)
Wetisol (INGRI)
WETISOL S-Wash — flushing compound for equipment and tools
Ethylene glycol ether flushing liquid for cleaning rigs and hoses immediately after spraying, and tools after LAM 361 mastic.
Price on request
Wetisol (INGRI)
Wetisol S-MP1 — polyurethane primer for polyurea
One-component moisture-curing primer for polyurea on concrete, metal, bituminous and other non-rigid substrates; applied from −10 °C.
Price on request
Wetisol (INGRI)
WETISOL INSEAL 150 — penetrating waterproofing for concrete
Penetrating dry mix for old and new concrete: works from either side of water pressure and raises watertightness by 3 steps.
Price on request
Wetisol (INGRI)
Wetisol S-CP — epoxy primer for polyurea
Two-component epoxy primer for concrete and brick under Wetisol Spray sprayed polyurea; adhesion to concrete over 4.0 MPa.
Price on request
Wetisol (INGRI)
WETISOL Ecto SF — hydraulic plug for stopping leaks
Chloride-free rapid-hardening cement mix for eliminating active leaks in concrete, brick and stone; starts to harden after 1–2 min.
Price on request