INDASTRO
LEVELINE FE 2k/100 two-component epoxy self-levelling floor — solvent-free
Epoxy self-levelling floor with 100% solids for workshops, warehouses, car parks, food and pharmaceutical plants; Shore D hardness from 85.
Price on request
INDASTRO
LEVELINE FC830 finishing self-levelling floor — cement-based self-levelling compound
LEVELINE FC830 is a self-levelling mix based on special cements that works both as a finishing coat and as a flat base for polymer floors. It is poured by pump or by hand, can be walked on after just 3 hours, and the floor takes full load after 7 days. Abrasion class AR0.5, compressive strength at 28 days at least 35 MPa, flexural strength at least 8 MPa, water impermeability W20. Suitable for workshops, warehouses, retail and public premises.
Specifications
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | floor material |
| Use | production workshops, warehouses and logistics, retail and public |
| Base | special cements, mineral filler, modifying additives |
| Packaging | 20 kg bags, 60 per pallet 1200×800 |
| Application method | self-levelling cement finishing floor: by pump or by hand, gauge rake + spiked roller; strips up to 6-8 m with machine application; base for polymer coatings |
| Application temperature | +5…+30 °C (+17…+23 °C recommended) |
| Curing | foot traffic 3 hours; partial load after 1 day; full load after 7 days; acrylic varnish after 1 day; polymer floors after 3-7 days (at substrate moisture no more than 4%) |
| Key properties | Abrasion EN 13892-4 (BCA) AR0.5; compressive strength at 24 h at least 15 MPa, at 28 days at least 35 MPa; flexural strength at 28 days at least 8 MPa; bond at least 2 MPa; shrinkage no more than 0.5 mm/m; W20; F1300; aggregate size no more than 0.5 mm; service temperature -50…+70 °C |
| Layer thickness | permissible 3-40 mm; recommended 5-20 mm |
| Consumption | 1.8-1.9 kg/m2 at a 1 mm layer |
| Shelf life | 6 months |
| Standards | manufacturer's TU; EN 13892-4 (BCA) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Innolayn NC60 SFiber — two-component grout with steel reinforcing fibre
Grout of cementitious mix and steel fibre for installing equipment, columns, bridges and airfields; flexural from 14 MPa, compressive from 60 MPa at 28 days.
Price on request
INDASTRO
LEVELINE FC810 pourable topping — for new and worn concrete floors
Pourable hardening mortar for fresh concrete and for repairing worn floors in workshops and warehouses; abrasion class AR1 to EN 13892-4.
Price on request
INDASTRO
LEVELINE FP890 one-component polyurethane sealer — curing fresh concrete
Clear polyurethane sealer for curing freshly laid concrete and toppings in workshops and warehouses; dries in 2 hours at +20 °C.
Price on request
INDASTRO
Profskrin RC60 RLq — high-strength flowable R4 mortar for heavily reinforced structures
Non-shrink flowable R4 mortar with fibre for heavily reinforced areas, bridges, roads, airfields and joints; 60 MPa at 28 days, work from −10 °C.
Price on request
INDASTRO
LEVELINE FP860 polyurethane self-levelling floor — elastic solvent-free coating
Elastic polyurethane self-levelling floor for workshops, warehouses, offices and schools; elongation at break from 40%, service from −60 to +80 °C.
Price on request