LEVL (INGRI)
LEVL RemTop — compound for local repair of topping floors
Polymer-cement primer and gauging agent for repairing hardened floors with LEVL Top mixes; bond to substrate at least 1.5 MPa.
Price on request
LEVL (INGRI)
LEVL Top Silex — silicon carbide topping for industrial floors
LEVL Top Silex is based on cement and silicon carbide filler, which sets it apart from quartz and corundum mixes. The topping is worked into freshly placed concrete with a power trowel and protected with LEVL Cure 100. In natural colour, compressive strength after 28 days is at least 90 MPa with abrasion up to 0.15 g/cm²; in coloured versions, at least 70 MPa and up to 0.20 g/cm². It suits workshops, warehouses, car parks and public buildings with very significant mechanical loads.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | cement, silicon carbide filler, functional additives |
| Colour | natural (grey); coloured: green, red, light grey, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner |
| Application method | dry-shake application onto freshly placed concrete (spreader cart or by hand) as 2/3 + 1/3 of the consumption, floating and polishing with a power trowel; then LEVL Cure 100 (0.10–0.15 kg/m²); joints: Vilaterm backer rod + LEVL Flex PU40; concrete at least M300 (B22.5), without air-entraining admixtures |
| Application temperature | air and substrate +5…+30 °C; air humidity at least 50% |
| Curing | foot traffic: +10 °C ~18 hours, +20 °C ~12 hours, +25 °C ~8 hours; full strength gain: ~10 / ~7 / ~5 days |
| Key properties | Compressive strength (28 days) at least 90 (natural) / 70 (coloured) MPa; abrasion (wear) no more than 0.15 (natural) / 0.20 (coloured) g/cm²; mortar density at least 2350 kg/m³; mechanical loads: very significant; service temperature from minus 40 °C to +60 °C (short-term up to +100 °C) |
| Layer thickness | 2–5 mm |
| Consumption | 3–8 kg/m²; natural: significant loads 3...5, very significant loads 5...8 kg/m²; coloured: 5...6 / 6...8 kg/m² |
| Shelf life | 12 months; storage at +5...+30 °C |
| Standards | TU 5745-051-94613022-2015; GOST 310.4, GOST 13087; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 351 — elastic polyurethane self-levelling floor
Gloss, highly elastic RAL self-levelling coating that bridges cracks, for workshops, warehouses, offices and sports facilities.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 016 — thixotropic PU-cement for skirtings and coves
Compound for vertical surfaces, skirtings and coves in PoliCem polyurethane-cement systems; service up to +90 °C, resistant to hot water.
Price on request
LEVL (INGRI)
LEVL RemTixo Rapid AF — thixotropic repair compound for work in frost
Rapid-hardening fibre-reinforced mix for repairing concrete in cold stores, on roads and airfields at air temperatures down to −10 °C.
Price on request
LEVL (INGRI)
LEVL Top C50 — topping for floors with service temperatures up to +200 °C
Economical hardening topping for workshops, warehouses and car parks with strength from 50 MPa and a service range from −40 to +200 °C.
Price on request
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request