LEVL (INGRI)
LEVL CemPol 30 — low-shrinkage cement screed and industrial floor
Mortar mix for a finishing cementitious floor or a base under self-levelling coatings; compressive strength 40 MPa, non-combustible (NG, KM-0).
Price on request
LEVL (INGRI)
LEVL CemPol 40 — thin-layer self-levelling screed for indoor use
LEVL CemPol 40 thin-layer self-levelling compound is intended for indoor work only. It is poured over LEVL Base 200 primer, spread with a squeegee and rolled with a spiked roller; if required, the surface is additionally impregnated with LEVL Coat 111 or 207W. The floor can be walked on after 2–4 hours at +20 °C, and after 28 days compressive strength reaches 40 MPa (class B35), flexural tensile strength 8 MPa. It suits workshops, warehouses, retail and public buildings.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | special cements, modifying additives (self-levelling, rapid-hardening) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 4.5 kg of water per bag |
| Application method | thin self-levelling coating for indoor use only, over LEVL Base 200 primer (2 coats of 0.15 kg/m² each): squeegee + spiked roller; manual and machine application; LEVL Cure 100; if required, impregnation with LEVL Coat 111 or 207W |
| Application temperature | air and substrate +10…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C at least 20 minutes; at +20 °C: foot traffic ~2–4 hours, light loads ~24 hours, full strength gain ~14–28 days |
| Key properties | Flexural tensile strength after 28 days at least 8 MPa; compressive strength at least 40 MPa (corresponds to Btb5.2 and B35); bond at least 1.5 MPa; flowability 260–280 mm (Rk6); maximum aggregate size 0.63 mm; service temperature from minus 40 °C to +60 °C |
| Layer thickness | 3–15 mm (recommended 5–10 mm) |
| Consumption | 9.0–27.0 kg/m² for 5–15 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10; GOST R 58277, GOST 31358 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL RemTixo — universal concrete repair compound
Cement mix with polymer fibre for repairing horizontal and vertical concrete surfaces; compressive strength 50 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL Coat 351 AS — antistatic polyurethane self-levelling floor
Smooth antistatic PU coating with chemical resistance and combustibility group G1 for chemicals, hangars, electronics and laboratories; 10⁶–10⁹ ohm.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 015 — polyurethane-cement paint coating
Thin-layer PU-cement coating and sand seal coat in PoliCem systems for food and chemical workshops; Taber abrasion up to 60 mg.
Price on request
LEVL (INGRI)
LEVL Coat 307 — low-density epoxy self-levelling floor
Lightweight epoxy compound with high quartz sand loading for warehouses, workshops, car parks and wet rooms; compressive strength 60 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 551 — polyurethane binder for rubber crumb coatings
One-component solvent-free binder for water-permeable rubber crumb and EPDM coatings on sports grounds and playgrounds.
Price on request