LEVL (INGRI)
LEVL Coat 573 — main layer of a methyl methacrylate floor with coloured sand
Highly filled carboacrylate coating for workshops, car parks, food and wet rooms; full strength gain in about one day at +20 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 014 — highly filled polyurethane-cement floor
Highly filled LEVL PoliCem PU 014 polyurethane-cement is designed for harsh conditions: high mechanical and impact loads, chemicals and sharp temperature changes. In the thick-layer version the coating suits freezers down to −45 °C and withstands steam cleaning up to +120 °C. Compressive strength is at least 50 MPa, flexural 13 MPa, bond 2.0 MPa. The surface is smooth-textured matt, laid over PoliCem PU 05 primer; colours: silver grey, beige, green, dark grey and red-brown.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics, wet rooms |
| Base | three-component, highly filled: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, dark grey, red-brown (smooth-textured matt) |
| Packaging | 31.24 kg kit: A — metal pail 3.00 kg; B — plastic jerrycan 3.24 kg; C — paper bag 25 kg; A : B : C = 1.00 : 1.08 : 8.33 |
| Application method | over PoliCem PU 05 primer with a broadcast: gauge rake + spiked roller (smooth, 6–12 mm) or with a sand broadcast and a PU 015 seal coat (textured, 8 mm) |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C 17 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~72 h / ~6 days / ~10 days; +20 °C ~48 h / ~3 days / ~7 days; +30 °C ~24 h / ~2 days / ~5 days |
| Key properties | Compressive strength at 28 days at least 50 MPa; flexural at least 13 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +90 °C; at 9 mm and more: freezers at −45 °C and steam cleaning up to +120 °C |
| Layer thickness | from 6 to 12 mm |
| Consumption | 12.8–25.6 kg/m² for 6–12 mm (smooth); 10.5 kg/m² + sand broadcast 6.9 kg/m² + PU 015 1.0 kg/m² (textured, 8 mm) |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST 5802, GOST 310.4, GOST R 58277 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 161 — polyurethane hardening impregnation for concrete
One-component impregnation for weak porous mineral substrates; applied at air temperatures down to −10 °C, service from −60 °C.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 12 — lithium silicate impregnation for concrete floors
Hardening and dustproofing lithium silicate impregnation with 11 % non-volatile content for concrete, topping and polished floors.
Price on request
LEVL (INGRI)
LEVL CemPol 10 — cementitious floor for heavy vehicle traffic
Stiff mortar mix for new and repaired floors of ports, container yards and car parks; strength 60 MPa, frost resistance F1 200.
Price on request
LEVL (INGRI)
LEVL Coat 311 AS — antistatic epoxy self-levelling floor
Gloss antistatic RAL coating for server rooms, cleanrooms, electronics and stores of flammable substances; 10⁶–10⁹ ohm.
Price on request
LEVL (INGRI)
LEVL Coat 308 — economical filled epoxy self-levelling floor
Epoxy compound used only with quartz sand, for warehouses, workshops, car parks and wet rooms; compressive strength 55 MPa.
Price on request