LEVL (INGRI)
LEVL Coat 111 — epoxy impregnation for hardening concrete
Two-component epoxy impregnation for dustproofing and hardening porous mineral substrates; adhesion to concrete over 4.0 MPa.
Price on request
LEVL (INGRI)
LEVL Self 12 — self-levelling underlayment for industrial coatings
LEVL Self 12 levelling compound prepares the concrete substrate for industrial polymer and cementitious coatings; it is not a finishing floor. The mix is poured over LEVL Base 200 primer, spread with a squeegee and rolled with a spiked roller, by hand or by machine. At +20 °C it can be walked on after 2–4 hours, and the next coating is laid after 2–3 days. Compressive strength after 28 days is at least 30 MPa, flexural 7 MPa, bond to substrate 1.5 MPa.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics |
| Base | special cements, modifying additives (self-levelling mix) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 4.5–4.75 kg of water per bag |
| Application method | base levelling of concrete under industrial polymer and cementitious coatings; over LEVL Base 200 primer (2 × 0.15 kg/m²); squeegee + spiked roller; manual and machine application; subsequent coatings after 2–3 days |
| Application temperature | air and substrate +10…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 20 minutes; at +20 °C: foot traffic ~2–4 hours, light loads ~1–2 days, full strength gain ~14–28 days |
| Key properties | Compressive strength after 28 days at least 30 MPa; flexural at least 7 MPa; bond at least 1.5 MPa; mechanical loads: moderate; service temperature from −40 °C to +60 °C; grain size 0.63 mm |
| Layer thickness | 5–30 mm (thinner layers are possible) |
| Consumption | 1.77 kg/m²/mm (theoretical); 8.9–53.1 kg/m² for 5–30 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST R 58277-2018; SGR No. RU.77.01.34.008.E.000244.02.19; declaration ROSS RU.PA01.B.28049 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL CemPol 30 — low-shrinkage cement screed and industrial floor
Mortar mix for a finishing cementitious floor or a base under self-levelling coatings; compressive strength 40 MPa, non-combustible (NG, KM-0).
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 — smooth polyurethane-cement floor coating
Matt polyurethane-cement floor for dairy, brewing and meat production, pharmaceuticals and chemicals; compressive strength 55 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 306 DA — decontaminable epoxy self-levelling floor
Smooth seamless epoxy coating for nuclear industry rooms subject to decontamination; Shore D hardness at least 70.
Price on request
LEVL (INGRI)
LEVL RemTop — compound for local repair of topping floors
Polymer-cement primer and gauging agent for repairing hardened floors with LEVL Top mixes; bond to substrate at least 1.5 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 502 — clear epoxy layer for self-levelling 3D floors
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Price on request