LEVL RemTixo Rapid — rapid-hardening thixotropic repair compound
Non-shrink mix for fast concrete repair of roads, airfields and car parks; compressive strength 10 MPa after just 6 hours.

LEVL RemTixo universal repair mix restores concrete and the concrete cover of structures, fills joints when making them monolithic, and suits both floors and vertical surfaces. The cement compound with polymer fibre is applied by hand or by machine and then covered with film or hessian or treated with LEVL Cure 100. After 7 days compressive strength is at least 45 MPa, after 28 days 50 MPa, flexural 10.6 MPa; bond to substrate from 1.5 MPa. Packaging: 25 kg bag.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, warehouses and logistics |
| Base | dry cement mix with polymer fibre |
| Packaging | 25 kg paper bag with inner polyethylene liner |
| Application method | repair of horizontal and vertical surfaces, restoration of concrete and the concrete cover, grouting of joints; by hand or by machine; curing: film/hessian/LEVL Cure 100 |
| Application temperature | +5…+30 °C (ambient and substrate); concrete at least B22.5 |
| Key properties | Compressive strength at least 45 MPa (7 days) / 50 MPa (28 days); flexural at 28 days 10.6 MPa; bond at least 1.5 MPa; density 2300 ± 100 kg/m³; service temperature from minus 40 to plus 60 °C; not acid-resistant |
| Layer thickness | 5–30 mm (not less than 5 and not more than 30 mm) |
| Consumption | 2 kg of dry mix per 1 m² at a thickness of 1 mm (theoretical) |
| Shelf life | 12 months; storage at +5…+30 °C |
| Standards | TU 5745-025-94613022-10 with Amendment No. 1; GOST 310.4, GOST 31356, GOST 5802; not subject to fire certification (Decision No. 00134R-05/13) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink mix for fast concrete repair of roads, airfields and car parks; compressive strength 10 MPa after just 6 hours.
Composite panel with polyurethane infill for movement, thermal and shrinkage joints in floors of warehouses, workshops and retail buildings.
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Epoxy primer with accelerated curing under LEVL floors: foot traffic after 6 hours, full strength in about 12 hours at +20 °C.
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Two-component clear varnish protecting polymer floors, including those with coloured chips, against abrasion and UV; gloss at least 60 %.