LEVL (INGRI)
LEVL Coat 202 W — water-based vapour-permeable epoxy floor paint
Matt water-based epoxy coating for wet rooms, food and pharmaceutical production and fresh concrete; adhesion over 4 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 551 — polyurethane binder for rubber crumb coatings
Sports grounds, playgrounds, running tracks and courts are covered with a resilient layer of rubber crumb or EPDM granules bound with LEVL Coat 551. The one-component solvent-free polyurethane gives a monolithic, water-permeable, non-slip and injury-safe coating resistant to abrasion and impact. The mix is laid by hand with a trowel and compacted with a roller over LEVL Coat 151 primer; the binder is also suitable for making crumb rugs, mats and tiles, and as an adhesive. Packaging: 15 kg pail and 225 kg drum.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | outdoor areas |
| Base | one-component polyurethane binder; no organic solvents |
| Colour | yellowish liquid; the coating can be tinted with pigment |
| Packaging | 15 kg pail; 225 kg drum |
| Application method | binder for resilient water-permeable coatings made of rubber crumb / EPDM granules (children's, play and sports grounds, running tracks, courts; injury-safe stair coverings, dirt-trapping coverings, agricultural premises); crumb products (rugs, mats, tiles); adhesive; laid by hand with a trowel and compacted with a roller; over LEVL Coat 151 primer; finish LEVL Coat 351/353 |
| Application temperature | air and substrate +10…+30 °C; air humidity no more than 80 %; substrate moisture no more than 4.0 % by weight; 3 °C above the dew point; concrete at least 25.0 MPa in compression and 1.5 MPa in tension |
| Curing | pot life when mixed with crumb 30 minutes at 20 °C and 70 % humidity |
| Key properties | Tensile breaking stress 5–6 MPa; non-volatile content 100 %; density 1.08–1.10 g/cm³; flow-cup viscosity 140–180 s (VZ-246, 6 mm nozzle); the coating is monolithic, water-permeable, non-slip, injury-safe, resistant to abrasive wear and impact |
| Consumption | as a binder: crumb : binder = 6 : 1 (parts by weight); as an adhesive 0.4–0.6 kg/m² (theoretical) |
| Shelf life | 6 months from the date of manufacture; storage at +5…+25 °C |
| Standards | TU 2252-017-94613022-07; test methods GOST 28513-90, GOST 8420-74, GOST R 52487-2005, GOST 11262-80 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 208 — epoxy paint for concrete floors, walls and ceilings
Two-component semi-gloss RAL paint coating for workshops, car parks, food production and schools; Taber abrasion up to 65 mg.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 12 — lithium silicate impregnation for concrete floors
Hardening and dustproofing lithium silicate impregnation with 11 % non-volatile content for concrete, topping and polished floors.
Price on request
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Coat 252T — gloss light-stable polyurethane floor varnish
Two-component clear varnish protecting polymer floors, including those with coloured chips, against abrasion and UV; gloss at least 60 %.
Price on request
LEVL (INGRI)
LEVL Coat 303 — epoxy self-levelling floor, smooth and textured
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Price on request