Monopol Epoxy 5 — chemically resistant epoxy self-levelling floor
Gloss epoxy self-levelling floor for workshops, warehouses, car parks and sales floors, resistant to abrasion, impact and chemicals; Shore D hardness 80.

For fuel and lubricant stores and explosives stores, as well as other fire and explosion hazard sites, Monopol produces the spark-safe topping TOP 400. It is designed for an increased load regime and prevents sparking; its non-sparking property is confirmed by a test report, and there is a fire safety certificate. Compressive strength at 28 days is at least 70 MPa, abrasion 0.14 g/cm², combustibility category NG. The laying technology is the same as for dry-shake toppings: application onto fresh concrete and machine floating.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | toppings |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | dry hardening mix with non-sparking aggregate (the aggregate type is not named in the method statement) |
| Colour | natural |
| Packaging | multi-wall paper bag 25 kg, 40 bags per pallet |
| Application method | dry application onto freshly laid concrete in 2 stages (60-65% + 35-40% of the consumption), floating with a power trowel with a disc, finishing with blades; curing — Monopol Sealer 2/2S/2T/2E 0.1 l/m² |
| Application temperature | substrate and air not below +5 °C; application temperature from +5 to +25 °C |
| Curing | At substrate temperature +10/+20/+30 °C: foot traffic ≈20/≈15/≈10 h, putting into service ≈10/≈7/≈5 days, full strength gain 28 days (method statement table); in the specifications table: foot traffic after 24 h, light load (no more than 20 MPa) after 7 days |
| Key properties | Non-sparking (spark-safe); compressive strength at 28 days min. 70 MPa; flexural strength at 28 days min. 7 MPa; abrasion LKI-3M 0.14 g/cm²; impact (GOST 30353) at least 15 kg from a height of 1 metre; shrinkage max. 0.1%; max. particles up to 3.0 mm; bulk density 1950 kg/m³; NG |
| Layer thickness | ≈ 2 – 5 mm |
| Shelf life | 12 months from the date of manufacture |
| Standards | certificate of conformity ROSS RU.NV78.N03645; fire safety certificate MONOPOL TOP_HARD ROSS RU.32528.04BST0.OS03.00281; non-sparking test report |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Gloss epoxy self-levelling floor for workshops, warehouses, car parks and sales floors, resistant to abrasion, impact and chemicals; Shore D hardness 80.
Non-shrink rapid-hardening R4 mortar with fibre for repairing industrial floors in warehouses, workshops and car parks; from 30 MPa after one day.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Conductive polyurethane-cement floor for chemicals, pharmaceuticals, explosion-hazard production sites and warehouses; resistance below 10⁹ Ω.
Three-component polyurethane-cement primer for all Policrete systems at food, pharmaceutical and chemical facilities; adhesion above 4.3 MPa.
Budget gloss grey epoxy paint for concrete and metal floors in workshops, warehouses and car parks; Taber abrasion 40 mg.