Monopol
Monopol Epoxy 3W — water-based epoxy paint-primer for damp substrates
Water-based epoxy paint, primer and impregnation in one product for workshops and areas with chemical exposure; can be applied to a damp substrate.
Price on request
Monopol
Monopol Epoxy 5M — filled epoxy floor, class KM1
The Epoxy 5M modification is intended for filling with quartz sand on site; without sand the compound is used only as a decorative finishing layer. Fire safety — class KM1, and the coating is non-sparking. Compressive strength after 7 days at least 70 MPa, flexural strength at least 30 MPa, Shore D hardness 80, Taber abrasion 45 mg. It is poured over Monopol Epoxy 4, 4M or 4S primers; full vehicle load at +20 °C is allowed after 120 hours.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, chemically resistant |
| Base | epoxy resin and polyamine hardener; quartz filler, pigments; used with quartz sand 0.1-0.4 |
| Colour | grey, light grey, manufacture to the RAL catalogue possible |
| Packaging | 25 kg kit: component A 20 kg + component B 5 kg |
| Application method | poured over Monopol Epoxy 4 / 4M / 4S primer with filling with quartz sand 0.1-0.4 mm; without sand — only as a decorative finishing layer no more than 1.5 mm thick (1.36 kg/m² per 1 mm) |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate at least 3 °C above the dew point; substrate moisture no more than 4% by weight |
| Curing | At +20 °C: foot traffic 24 h, light vehicle traffic 72 h, full vehicle load 120 h; pot life: +10 °C at least 45 min, +23 °C at least 30 min, +30 °C at least 15 min |
| Key properties | Compressive strength at 7 days min. 70 MPa; flexural strength at 7 days min. 30 MPa; Taber 45 mg; Shore D 80; elongation 5-7%; density 1.36 g/cm³ (with quartz sand 1.75); non-sparking; fire safety KM1 |
| Layer thickness | without sand — no more than 1.5 mm (decorative finish) |
| Consumption | in the method statement: without sand 1.36 kg/m² per 1 mm of layer |
| Shelf life | 12 months from the date of manufacture; store at a temperature not above +30 °C |
| Standards | fire safety rating KM1; MONOPOL polymer floor coating certificates (ROSS.RU.AZh49.N04910, RU.32528.04BST0.OS03.00398) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol Policrete 150 — polyurethane-cement paint coating
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.
Price on request
Monopol
Monopol TOP 200 — corundum dry-shake topping for concrete floors
Corundum mix for hardening concrete floors with medium loads in workshops, warehouses and car parks; a coloured version is available.
Price on request
Monopol
Monopol Policrete 203 — self-levelling polyurethane-cement floor
Self-levelling polyurethane-cement floor for car parks, wet production areas and food warehouses; compressive strength from 58 MPa, R10.
Price on request
Monopol
Monopol Hard 50 — high-strength cement-based self-levelling floor
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Price on request
Monopol
Monopol 1 (lithium impregnation) — hardening and dustproofing concrete
Deep-penetrating lithium impregnation for dustproofing, hardening and polishing concrete floors in workshops, warehouses, car parks and sales floors.
Price on request