Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Monopol Epoxy 5 AS6 — conductive epoxy self-levelling floor
Monopol

Monopol Epoxy 5 AS6 — conductive epoxy self-levelling floor

Epoxy floors

Epoxy 5 AS6 drains static charge into the earthing system: the resistance between the surface and the earthing circuit is below 10⁶ Ω. The coating is intended for premises with explosive gases, dust and liquids, chemical plants and oil and gas facilities. It is poured only over the Monopol Epoxy 4 AS conductive primer as part of the ME 45AS system. Compressive strength at least 70 MPa, Shore D hardness 80, and the coating is non-sparking.

Specifications

ManufacturerMonopol — OOO “TEKHBETON”
Typeepoxy floors
Useproduction workshops, chemically resistant, antistatic/conductive
Baseepoxy resin and polyamine hardener; quartz aggregate, conductive additives; free of organic solvents
Colourgrey, coloured; tinting to RAL possible
Packaging25 kg kit: component A 20 kg + component B 5 kg
Application methodpoured with a gauge rake, rolled with a spiked roller
Application temperaturesubstrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight; 3 °C above the dew point; substrate pull-off strength at least 3.7 MPa, concrete no lower than M200
CuringAt +20 °C: foot traffic 24 h, light vehicle traffic 72 h, full vehicle load 120 h
Key propertiesResistance between the surface and the earthing system < 1*10^6 Ω; compressive strength at 7 days min. 70 MPa; flexural strength min. 30 MPa; pull-off strength at least 3.7 MPa; Taber 42 mg; Shore D 80; elongation at least 5%; density 1.4 g/cm³; non-sparking
Layer thicknessrecommended layer 2 mm
Shelf life12 months from the date of manufacture
StandardsMONOPOL polymer floor coating certificates

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Monopol