Monopol Epoxy 4 — clear epoxy primer for self-levelling floors
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.

The self-levelling Policrete 203 is designed for constant foot traffic and low-intensity vehicle traffic, including forklifts. It is laid in car parks, wet production areas, warehouses including food warehouses, as well as in amenity and administrative premises. Compressive strength at least 58 MPa, flexural strength at least 27.1 MPa, Shore D hardness from 84, slip resistance R10, class KM1. The coating is resistant to water, oils, petrol and medium-concentration acid and alkali solutions.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane-cement floors |
| Use | car parks and ramps, wet premises, warehouses and logistics, food and pharmaceutical, retail and public, chemically resistant |
| Base | polyurethane resin with mineral filler and pigment paste, four-component self-levelling |
| Colour | according to the colour chart |
| Packaging | 12.8 kg: component A 2.5 kg + B 2.8 kg + C 7.5 kg (pail) + pigment paste 150 ml |
| Application method | self-levelling layer 2-3 mm over Monopol Policrete 100 primer (broadcast with Monopol Quartz) |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C; substrate moisture no more than 12% |
| Curing | At +20 °C: walking after 12 hours; light vehicle loads after 24 hours; full vehicle loads and chemically aggressive liquids after two days |
| Key properties | Compressive strength at least 58 MPa; flexural strength at least 27.1 MPa; impact strength 9.3 J/cm²; abrasion no more than 0.1 g/cm²; AR 0.5; Shore D at least 84; R10; water absorption 0%; KM1; vapour permeability yes; density 1.66 g/cm³; adhesion > 5.1 MPa (cohesive failure in concrete); chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents |
| Layer thickness | from 2 to 3 mm |
| Consumption | 1.85 kg/m² per 1 mm of layer thickness |
| Shelf life | 12 months from the date of manufacture; store at a temperature not below +5 °C and not above +30 °C |
| Standards | fire hazard class KM1 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.
Conductive gloss epoxy paint for rooms with CNC equipment, laboratories, pharmaceuticals and clean areas; resistance 10⁴–10⁶ Ω.
Polymer-cement self-leveller for levelling concrete under industrial, commercial and sports floor coverings; polymer floor after 3 days.
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.