Monopol BR 400M — winter repair mortar down to −10 °C
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.

PU 15 is the only polyurethane self-levelling floor in the Monopol catalogue. The rigid-elastic coating resists impact and vibration loads and substrate cracking: elongation at break at least 70%, tensile strength at least 20 MPa, Shore D hardness 40. It is poured as the finishing layer over Epoxy 4, 4S or 4M primers on concrete, terrazzo and metal substrates at temperatures from +8 °C. It is used in production, medicine, education, the food industry, laboratories, sports facilities and car parks.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane floors |
| Use | production workshops, retail and public, food and pharmaceutical, car parks and ramps, decorative |
| Base | polyol and isocyanate hardener; quartz filler, pigments; solvent-free |
| Colour | standard grey, manufacture to the RAL catalogue possible |
| Packaging | 25 kg: component A 21.1 kg + component B 3.9 kg |
| Application method | finishing self-levelling layer over Monopol Epoxy 4 / 4S / 4M primer; concrete, terrazzo and metal substrates |
| Application temperature | substrate and air during application and curing not below +8 °C; substrate moisture no more than 4%; 3 °C above the dew point |
| Key properties | Shore D hardness 40; Taber abrasion (CS-10/1000 g/1000 rev) no more than 60 mg; tensile strength at least 20 MPa; relative elongation at least 70%; density 1.4 g/cm³; non-volatiles 100%; spark-safe; pot life at least 20 min; rigid-elastic, resistant to impact and vibration loads and to substrate cracking |
| Consumption | 1.4 kg per 1 mm of thickness per 1 m² |
| Shelf life | 12 months from the date of manufacture; store at a temperature not above +30 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
Lightfast membrane-forming curing compound for fresh concrete and toppings on outdoor areas and the sunny side; 20 l pail.
Conductive epoxy floor for premises with explosive gases, dust and liquids, chemical and oil and gas facilities; resistance below 10⁶ Ω.
Budget gloss grey epoxy paint for concrete and metal floors in workshops, warehouses and car parks; Taber abrasion 40 mg.
Non-sparking high-flow self-levelling floor and non-shrink repair compound for concrete and topping floors; compressive strength from 55 MPa.
Three-component polyurethane-cement primer for all Policrete systems at food, pharmaceutical and chemical facilities; adhesion above 4.3 MPa.