Monopol
Monopol Hard 40 — polymer-cement self-levelling floor and repair compound
Self-levelling polymer-cement finishing floor and non-shrink repair material for concrete and topping floors; from 40 MPa.
Price on request
Monopol
Monopol Epoxy 3 — epoxy paint for concrete floors
Epoxy 3 enamel dustproofs and protects concrete with a thin gloss layer, and is also suitable for terrazzo, polymer, polymer-cement and metal surfaces — both horizontal and vertical. It is applied in two or more coats, the second after 5–6 hours; use begins no earlier than 48 hours later, full loads after 72 hours. The coating is non-sparking and highly chemically resistant, Taber abrasion 40 mg. Colours — grey, light grey and to the RAL catalogue.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, chemically resistant |
| Base | epoxy resin, polyamine hardener, blend of organic solvents, pigments, fillers |
| Colour | grey, light grey, manufacture to the RAL catalogue possible |
| Packaging | 30 kg (A 25.7 kg + B 4.3 kg); 12 kg (A 10.3 kg + B 1.7 kg) |
| Application method | thin-layer paint in 2 or more coats on concrete, terrazzo, polymer, polymer-cement and metal substrates, horizontal and vertical; second coat after 5-6 hours |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight |
| Curing | start of use no earlier than 48 hours; full loads after 72 hours; drying to degree 3 at 23 °C no more than 6 h |
| Key properties | Compressive strength at 7 days 70 MPa; flexural strength at 7 days 15 MPa; Taber 40 mg; density 1.5 g/cm³; non-volatiles at least 90%; non-sparking; gloss; pot life at 23 °C at least 30 min; high chemical resistance |
| Consumption | 1.74 g/m² per 1 µm; mineral substrate: first coat — based on a trial application, second coat no more than 175 g/m² (100 µm) |
| Shelf life | 12 months from the date of manufacture |
| Standards | certificate ROSS.RU.AZh49.N04910 (MONOPOL polymer floor coatings) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol BR 400M — winter repair mortar down to −10 °C
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
Price on request
Monopol
Monopol Epoxy 4W AS — conductive primer for antistatic polyurethane-cement floors
Conductive water-based epoxy primer for Policrete 306 AS antistatic floors in cleanrooms, pharmaceuticals and chemicals; below 10⁶ Ω.
Price on request
Monopol
Monopol PU 15 — rigid-elastic polyurethane self-levelling floor
Rigid-elastic polyurethane self-levelling floor for production sites, medicine, schools, laboratories and car parks; elongation at break from 70%.
Price on request
Monopol
Monopol Policrete 150 — polyurethane-cement paint coating
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.
Price on request
Monopol
Monopol BR 500 — repair mortar for car park entrances
Thixotropic R3 repair mortar for concrete structures and car park entrance surfaces; compressive strength from 25 MPa after one day.
Price on request