A thin-layer way to obtain an antistatic floor is Epoxy 3 AS paint with conductive additives. The resistance between the surface and the earthing system is 10⁴–10⁶ Ω, and the product meets the requirements of SP 29.13330.2011. The paint is gloss, grey and non-sparking; the second coat is applied after 5–6 hours, and the room should be put into use after 48 hours. It is used in rooms with CNC equipment and computers, pharmaceuticals, laboratories, woodworking and cleanrooms.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | antistatic/conductive, food and pharmaceutical, production workshops |
| Base | epoxy resin and polyamine hardener, conductive additives |
| Colour | grey |
| Packaging | 25 kg: component A 20.5 kg + component B 4.5 kg |
| Application method | conductive gloss paint; second coat after 5-6 hours |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight; substrate no lower than M200, adhesion at least 2.0 MPa |
| Curing | the room should be put into use after 48 hours; full loads after 72 hours |
| Key properties | Resistance between the surface and the earthing system 1*10^4 - 1*10^6 Ω; compressive strength at 7 days 70 MPa; flexural strength 15 MPa; Taber 40 mg; density 1.33 g/cm³; non-volatiles 88.6%; non-sparking; gloss; pot life at 23 °C at least 30 min |
| Layer thickness | coating thickness 100-300 µm |
| Consumption | 1.61 g/m²·µm for a single-coat concrete coating |
| Shelf life | 12 months (sealed container, enclosed room) |
| Standards | complies with SP 29.13330.2011 as amended by Amendments 1, 2 (cl. 5.11-5.14); surface resistance per GOST IEC 61340-4-1-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
Three-component polyurethane-cement primer for all Policrete systems at food, pharmaceutical and chemical facilities; adhesion above 4.3 MPa.
Non-sparking hardening topping for floors of fuel and lubricant stores, warehouses and workshops with fire and explosion hazards; strength from 70 MPa.
Multi-purpose epoxy compound: stand-alone coating, levelling layer under Epoxy 5M or anti-slip system with quartz sand.
Gloss epoxy enamel for dustproofing and protecting concrete floors in workshops, warehouses and car parks; full loads after 72 hours.
Corundum mix for hardening concrete floors with medium loads in workshops, warehouses and car parks; a coloured version is available.
