Monopol Primer 17 — deep-penetrating acrylic primer
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.

The strongest compound of the Hard range: at 28 days the compressive strength reaches at least 55 MPa, flexural strength at least 16 MPa, adhesion to concrete from 3 MPa. Hard 50 is laid as a finishing self-levelling floor or used for non-shrink repair of concrete and topping floors indoors; it is suitable for any loads except heavy chemical ones. Foot traffic is possible after just 6 hours, moderate-intensity mechanical loads after 7 days. The dry mix may be stored and transported at any temperature.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | concrete floor repair |
| Base | high-strength self-levelling cement-based dry mix with graded aggregate and polymer additives |
| Colour | natural (grey powder) |
| Packaging | multi-wall paper bag 20 kg |
| Application method | finishing self-levelling floor and non-shrink repair material for concrete, topping and other cement floors; indoors only; curing after 4-6 h (flooding with water and plastic sheeting, or Monopol Sealer) |
| Application temperature | application temperature from +10 to +30 °C |
| Curing | foot traffic after 6 h; mechanical loads (moderate intensity) after 7 days |
| Key properties | Compressive strength at 28 days at least 55 MPa; flexural strength at least 16 MPa; adhesion to concrete at least 3 MPa; flowability Rk5 22 - 26 cm; mortar working life at least 20 min |
| Layer thickness | 5-50 mm |
| Consumption | 1.8 kg/m² per 1 mm of thickness |
| Shelf life | 12 months in a dry place; can be stored and transported at any temperature; opened packaging — no more than 1 month |
| Standards | flowability per GOST 31356; load intensity per SNiP 2.03.13; certificate ROSS RU.NV78.N03646 (Monopol HARD) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.
Antistatic epoxy floor for premises with high-precision equipment, pharmaceuticals and laboratories; resistance 10⁶–10⁹ Ω.
Matt water-based polyurethane varnish for epoxy, polyurethane and PU-cement floors; does not yellow under UV, dries in 60 minutes.
Non-shrink rapid-hardening R4 mortar with fibre for repairing industrial floors in warehouses, workshops and car parks; from 30 MPa after one day.
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.