Monopol Epoxy 5W — water-based epoxy floor for wet production areas
Vapour-permeable water-based epoxy floor for fresh concrete, food workshops and premises with wet operation; walkable after 12 hours.

The professional impregnation Monopol 20M makes concrete stronger and water-repellent and stops surface dusting — the effect appears on day 7–14, and the full set of properties develops over 2–3 months. It can be used on concrete floors, cement-sand screeds including semi-dry ones, as well as foundations and walls, indoors and outdoors. The concrete must be at least 14 days old, and the substrate temperature from +4 to +35 °C. Packaging — 10 l canister.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, outdoor areas |
| Base | hardening and dustproofing water-repellent impregnation (the chemical base is not named in the method statement) |
| Packaging | 10 l plastic canister |
| Application method | concrete floors, cement-sand (incl. semi-dry) screeds, foundations, walls — concrete aged 14 days or more; interior and exterior work; if slippery after 15 min, wet with water and work with a brush |
| Application temperature | substrate temperature not below +4 °C and not above +35 °C |
| Curing | on day 7-14 the concrete becomes stronger, repels water and stops dusting; full set of properties — 2-3 months; cleaning with alkaline agents not earlier than 14 days |
| Key properties | Water-repellent (hydrophobic) surface, increased hardness and wear resistance |
| Consumption | 0.2 – 0.35 l/m² (depends on concrete porosity) |
| Shelf life | 1 year from the date of manufacture in a sealed container |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Vapour-permeable water-based epoxy floor for fresh concrete, food workshops and premises with wet operation; walkable after 12 hours.
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Lightfast membrane-forming curing compound for fresh concrete and toppings on outdoor areas and the sunny side; 20 l pail.
Deep-penetrating lithium impregnation for dustproofing, hardening and polishing concrete floors in workshops, warehouses, car parks and sales floors.
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.