Monopol Policrete 306 — polyurethane-cement floor for food production
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.

Primer 17 is a water-based acrylic dispersion that penetrates any absorbent substrate, strengthens it, reduces absorbency and improves bonding with the next layer. In Monopol systems it goes under Hard polymer-cement self-levelling floors. The primer is suitable for interior and exterior work, horizontal and vertical surfaces; substrate temperature — from +5 to +35 °C, drying — up to 4 hours. Shelf life in the factory container — 2 years.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | floor primers |
| Base | water-based acrylic dispersion |
| Application method | deep-penetrating primer for all absorbent substrates, interior and exterior work, horizontal and vertical; strengthens the substrate, reduces absorbency, increases adhesion; under Monopol Hard self-levelling floors |
| Application temperature | substrate not below +5 °C and not above +35 °C; relative air humidity no higher than 80% |
| Curing | drying time up to 4 hours |
| Key properties | Density at +23 °C 1 g/cm³; reduces the consumption of subsequent materials |
| Consumption | 0.1–0.2 l/m² for a single application |
| Shelf life | 2 years from the date of manufacture in an unopened sealed container |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.
Deep-penetrating lithium impregnation for dustproofing, hardening and polishing concrete floors in workshops, warehouses, car parks and sales floors.
Clear solvent-free epoxy varnish for protecting and restoring concrete, terrazzo and topping floors; full load after 72 hours.
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Budget gloss grey epoxy paint for concrete and metal floors in workshops, warehouses and car parks; Taber abrasion 40 mg.