ALFAPOL
ALFAPOL VB-1000(i) — high-strength non-sparking concrete floor
Rapid-hardening non-sparking concrete floor for workshops, warehouses, ramps and car parks: compressive strength of at least 80 MPa.
Price on request
ALFAPOL
ALFAPOL PU-1 — deep-penetrating polyurethane impregnation for concrete
The one-component polyurethane impregnation penetrates deep into concrete, strengthens the substrate and improves its chemical resistance, water resistance and the adhesion of subsequent layers. It is applied in two or three coats; works are permitted from as low as +5 °C and substrate moisture up to 5%. At +20 °C foot traffic is possible after 12 hours, bond strength to concrete is at least 2 MPa, and service is from −30 to +50 °C.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | chemically resistant, outdoor areas |
| Base | polyurethane; One-component deep-penetrating polyurethane primer-impregnation for concrete |
| Packaging | Metal pail – 9 kg.** |
| Application temperature | Application temperature, °C: +5 to +30°C; substrate moisture, max. 5% |
| Curing | At 10 / 20 / 30 °C: foot traffic after 24 / 12 / 8 h; Recoat interval, h, min.: 12 |
| Key properties | Bond strength to concrete (failure in concrete), min., MPa: 2; Service temperature, °C: -30 to +50°C |
| Consumption | Consumption, kg/m²: from 0.15; Consumption depends on the absorbency of the substrate, approx. from 150 g/m² per coat. |
| Shelf life | Shelf life in factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6 |
| Standards | TU 20.16.56-004-82166262-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL KI GSM — oil- and petrol-resistant antistatic self-levelling floor
Magnesia self-levelling floor, resistant to petroleum products, non-sparking and static-dissipative, for workshops and warehouses.
Price on request
ALFAPOL
ALFAPOL VB ZIMA — concrete floor for laying at low temperatures
Industrial concrete floor that can be laid at −5…+10 °C, for workshops, warehouses, wet rooms and open areas.
Price on request
ALFAPOL
ALFAPOL EP-3 — gloss epoxy floor paint
Solvent-free gloss epoxy paint for floors in workshops, car parks, retail and public buildings, tinting to RAL.
Price on request
ALFAPOL
ALFAPOL AK — antistatic magnesia self-levelling floor
Antistatic magnesia self-levelling floor for workshops, warehouses and public buildings, with abrasion no more than 0.4 g/cm².
Price on request
ALFAPOL
ALFAPOL VB(i) mosaic — marble mosaic coating (terrazzo)
Mosaic concrete with marble aggregate for decorative ground floors in public buildings and open areas.
Price on request