Floor 720 AS is the antistatic version of the polyurethane self-levelling compound: resistance to earth no more than 1.0×10⁶ Ω per GOST IEC 61340-4-1. The coating is laid over TAIKOR Primer 160 on top of copper tape connected to the earthing bus. Such floors are needed in fire and explosion hazard production, electronics, telecommunications, laboratories, machine rooms, paint booths, car service centres and filling stations. Elongation at break at least 15%, Shore D hardness about 80, service from −20 to +50 °C.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | polyurethane floors |
| Use | antistatic/conductive, production workshops, chemically resistant |
| Base | two-component low-viscosity antistatic self-levelling compound (polyurethane — of the TN-POL NALIVNOY PU Antistatic system); non-volatiles 99 % |
| Colour | RAL colour, gloss |
| Packaging | net weight 5.5; 19.5 kg |
| Application method | over TAIKOR Primer 160; in the system — self-adhesive copper tape in grids of 1.0-3.0 m connected to the earthing bus (installed by an electrician), fixing coat of Floor 720 AS applied by roller in a 200 mm strip, then pouring of the main layer; A:B = 100:28.2 by weight; gauge rake, spiked roller; working time on the floor about 30 min at +20 °C |
| Application temperature | air +5…+25 °C, relative humidity no more than 80 %; substrate from +8 to +25 °C |
| Curing | drying to degree 3 at 20 °C no more than 6 h; recoat window 24-72 h; full cure 7 days |
| Key properties | Resistance to earth no more than 1.0×10⁶ Ω (GOST IEC 61340-4-1); abrasion (CS10, 1000 cycles) no more than 60 mg; tensile strength at least 35 MPa; elongation at break at least 15 %; Shore D hardness about 80; adhesion to concrete at least 2 MPa; service temperature -20…+50 °C; density 1.40-1.60 g/cm3; pot life at least 30 min; resistance to water, petroleum products, salts, dilute alkalis and acids; in the system: RP1, V2, D2, T2 |
| Layer thickness | in the system main layer 1.50-2.00 mm |
| Consumption | theoretical consumption at a 2 mm layer — 3 kg/m2; in the system main layer 2.250-3.000 kg/m2, fixing coat 0.300-0.400 kg/m2 |
| Shelf life | 12 months; storage +5…+25 °C; transport -30…+30 °C |
| Standards | TU 20.30.22-147-72746455-2024; GOST IEC 61340-4-1; HS code (TN VED) 3214 90 0009 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy primer without a strong odour for TAIKOR Floor self-levelling floors and a binder for repair compounds; adhesion to concrete from 2 MPa.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Coloured thin-layer floor of TAIKOR Primer 150 primer-enamel and Top 425 enamel for production premises with dry and wet processes.
Epoxy self-levelling floor system based on TAIKOR Primer 160 and Floor 710 for sales floors, medicine, schools, car parks, warehouses and food workshops.
Elastic polyurethane self-levelling compound without a strong odour for workshops, warehouses, car parks and public buildings; elongation at break from 10%.
Epoxy primer-enamel for thin-layer polymer floors in car parks, warehouses and cold stores, as well as steel; application from −10 °C.
