TN-POL NALIVNOY Epoxy is a ready-made three-layer system: TAIKOR Primer 160 primer, a broadcast of calcined quartz sand and a TAIKOR Floor 710 self-levelling layer. The manufacturer offers thin-layer, smooth, filled, non-slip and reinforced versions for medium and heavy wearing loads with chemical exposure. The coating is non-sparking, solvent-free and impermeable to liquids; fire performance — RP1, V2, D2, T2. At +20 °C foot traffic is possible after 24 hours, full load after 7 days.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor material |
| Use | retail and public, car parks and ramps, wet premises, warehouses and logistics, production workshops, food and pharmaceutical, chemically resistant |
| Base | epoxy self-levelling floor: TAIKOR Primer 160 + quartz sand + TAIKOR Floor 710 |
| Colour | tinted to the RAL catalogue; uniform gloss coating |
| Application method | TAIKOR Primer 160 primer, broadcast of calcined quartz sand 0.4-0.8 / 0.5-1.0 / 0.8-1.2 mm onto the tacky primer, removal of loose sand, pouring of TAIKOR Floor 710 with a gauge rake/notched trowel, rolling with a spiked roller after 5-7 min; substrate: compressive strength at least 20 MPa, pull-off at least 1.5 MPa, moisture no more than 4 %; versions: thin-layer, smooth, filled, non-slip, reinforced |
| Application temperature | air and substrate from +8 to +25 °C |
| Curing | walking after 36/24/18 h; light load 5/3/2 days; full load 10/7/5 days (at +10/+20/+30 °C) |
| Key properties | Service temperature -20…+50 °C; flame spread RP1; ignitability V2; smoke generation D2; toxicity T2; non-sparking — yes; high mechanical and chemical resistance, impermeable to liquids, solvent-free, non-slip finish possible |
| Layer thickness | main layer 1.50-2.00 mm; versions: thin-layer (paint) 0.4-0.5 mm, smooth 1.5-2.0 mm, filled 1.5-3.0 mm, non-slip 2.0-2.5 mm, reinforced 3.0-4.5 mm; actual from 0.5 to 5 mm |
| Consumption | TAIKOR Floor 710 2.250-3.000 kg/m2; quartz sand 0.500-1.000 kg/m2 (in excess up to 2.5 kg/m2); TAIKOR Primer 160 0.300-0.500 kg/m2 |
| Standards | GOST R 51032-97, GOST 30402-96, GOST 12.1.044-2018, STO 004-02495342-2010 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Antistatic polyurethane floor system with copper tape and TAIKOR Floor 720 AS for explosion-hazard production, electronics and filling stations; up to 10⁶ Ω.
Elastic polyurethane self-levelling compound without a strong odour for workshops, warehouses, car parks and public buildings; elongation at break from 10%.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Deep-penetrating primer for dustproofing and hardening concrete floors and under TAIKOR Elastic 300 waterproofing; application from −10 °C.
Coloured thin-layer floor of TAIKOR Primer 150 primer-enamel and Top 425 enamel for production premises with dry and wet processes.
Antistatic polyurethane self-levelling floor for explosion-hazard production, electronics, laboratories, car services and filling stations; no more than 10⁶ Ω.
