For premises where static charge must not build up, TECHNONICOL offers the TN-POL NALIVNOY PU Antistatic system. Copper tape connected to the earthing bus is glued over TAIKOR Primer 160, fixed with a fixing coat, and the main layer of TAIKOR Floor 720 AS is poured. Resistance to earth is no more than 1.0×10⁶ Ω per GOST IEC 61340-4-1-2017. Areas of use — fire and explosion hazard production, the fuel and energy sector, electronics, telecommunications, medical equipment, laboratories, paint booths, car service centres and filling stations.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor material |
| Use | antistatic/conductive, production workshops |
| Base | antistatic polyurethane self-levelling floor: TAIKOR Primer 160 + copper tape + TAIKOR Floor 720 AS |
| Colour | tinted to the RAL catalogue; uniform gloss coating |
| Application method | TAIKOR Primer 160 primer; self-adhesive copper tape in grids of 1.0-3.0 m and along the perimeter, ends to the earthing bus (installed by an electrician); fixing coat of TAIKOR Floor 720 AS applied by roller in a 200 mm strip; main layer of TAIKOR Floor 720 AS poured 1.5-2.0 mm, rolled with a spiked roller |
| Application temperature | air and substrate from +8 to +25 °C |
| Curing | walking after 36/24/18 h; light load 5/3/2 days; full load 10/7/5 days (at +10/+20/+30 °C) |
| Key properties | Resistance to earth no more than 1.0×10⁶ Ω (GOST IEC 61340-4-1-2017); service temperature -20…+50 °C; RP1; V2; D2; T2; does not accumulate electric charge, impermeable to liquids, solvent-free |
| Layer thickness | main layer 1.50-2.00 mm |
| Consumption | TAIKOR Floor 720 AS main layer 2.250-3.000 kg/m2, fixing coat 0.300-0.400 kg/m2; TAIKOR Primer 160 0.300-0.500 kg/m2 |
| Standards | GOST IEC 61340-4-1-2017, GOST R 51032-97, GOST 30402-96, GOST 12.1.044-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Light- and weather-resistant polyurethane enamel for thin-layer floors in car parks, warehouses, stands and outdoor areas; winter version applied down to −10 °C.
Epoxy primer-enamel for thin-layer polymer floors in car parks, warehouses and cold stores, as well as steel; application from −10 °C.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Epoxy primer without a strong odour for TAIKOR Floor self-levelling floors and a binder for repair compounds; adhesion to concrete from 2 MPa.
Antistatic polyurethane self-levelling floor for explosion-hazard production, electronics, laboratories, car services and filling stations; no more than 10⁶ Ω.
Epoxy self-levelling compound for floors in workshops, warehouses, car parks, medical, food and children's facilities; abrasion to ASTM D 4060 up to 49 mg.
