BIRSS
BIRSS 53 SR — R3 mix for dry-mix and wet-mix shotcreting
Shotcrete mix for repairing and protecting structures, supporting mine workings, tunnel linings, silos and cooling towers; 40 MPa in compression at 28 days.
Price on request
BIRSS
BIRSS UK-2 hardener — corundum topping for industrial floors
Unlike the quartz-based UK-1, UK-2 contains a graded corundum filler, so the topping is intended for floors under high service loads. The mix is trowelled into fresh concrete by machine or by hand in two passes; the surface achieves frost resistance grade F2150 and water impermeability W8. The coating is moderately resistant to alkalis up to 8 %, mineral oils and petroleum products — fuel oil, petrol, kerosene and diesel.
Specifications
| Manufacturer | BIRSS — AO “Opytny Zavod Sukhikh Smesey”, Moscow |
|---|---|
| Type | toppings |
| Use | production halls, warehouses and logistics, car parks and ramps, retail and public, outdoor areas, wet rooms, chemically resistant |
| Base | dry mix: graded corundum filler, high-strength Portland cement, chemical and mineral additives |
| Colour | grey (tinted to the BIRSS palette) |
| Packaging | paper bags 25 kg (a 50 kg bag is also listed in the catalogue) |
| Application method | trowelled into freshly laid concrete (at least B22.5/M300) or BIRSS 8/53 sand concrete with power trowels or by hand, in two passes (2/3 + 1/3) |
| Application temperature | +5…+35 °C |
| Curing | waiting time before application 2–7 h (as for UK-1) |
| Key properties | 28-day compressive strength at least 65.0 MPa; flexural tensile strength Btb5.2/7.0 MPa; abrasion 0.4 g/cm²; impact resistance 2 kg; water impermeability W8; adhesion at least 0.6 MPa; frost resistance F2150; service temperature −50…+70 °C; grain size up to 2.5 mm; moderate resistance to alkalis up to 8 %, mineral oils, petroleum products (fuel oil, petrol, kerosene, diesel fuel) and substances of animal origin |
| Consumption | 4–6 kg of dry mix per 1 m² (depends on colour saturation) |
| Shelf life | 12 months from the date of manufacture in undamaged packaging, in a dry room |
| Standards | TU 5745-007-05668056-2013; QMS to GOST R ISO 9001-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS 59 S1 M600 — flowable R4 mix for repairing roads, bridges and airfields
Non-shrink pourable mortar for road pavements, runways, bridges, car parks and equipment foundations; 60 MPa at 28 days.
Price on request
BIRSS
BIRSS RSM-2 M350 — thixotropic R3 mix with normal setting times
Shrinkage-compensated repair mortar for bridges, tunnels, hydraulic structures and joints of precast reinforced concrete; class R3.
Price on request
BIRSS
BIRSS Izipol — elastic polyurethane self-levelling floor
Solvent-free polyurethane floor for mechanical and impact loads in industry, car parks, warehouses and retail.
Price on request
BIRSS
BIRSS RSM-1 M350 — two-component polymer-cement R3 repair system
Two-component mortar for repairing vertical, inclined and overhead concrete areas on bridges and in buildings; placing is possible from −10 °C.
Price on request
BIRSS
BIRSS 59 S1 M800 — high-strength pourable R4 mix for pavements and anchoring
Flowable non-shrink mix for repairing roads, bridges, industrial floors and anchoring equipment; 80 MPa in compression at 28 days.
Price on request