QTP® 1360 — clear epoxy varnish and pore filler
Chemical-resistant clear epoxy varnish for a finish over epoxy coatings and pore sealing in highly filled systems.

Work at sub-zero temperatures is the main distinguishing feature of this one-component polyurethane paint: the substrate and air may be from −20 °C to +30 °C. The solvent-free paint cures with atmospheric moisture and forms a thin-film grey gloss protective coating on concrete and mineral substrates. For a rough surface, quartz sand is broadcast between coats. The paint yellows under ultraviolet light; foot traffic is possible after just 4 h at +20 °C.
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | polyurethane floors |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | one-component polyurethane paint, cures with atmospheric moisture, solvent-free |
| Colour | grey, gloss; yellows under UV |
| Packaging | metal pails: 24 kg (20 l) and 6 kg (5 l) |
| Application method | in thin coats on concrete and mineral substrates; for a rough surface, quartz sand is broadcast between coats |
| Application temperature | substrate and air from −20 °C to +30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 6 / 4 / 4 h; light load after 12 / 12 / 10 h; full load after 24 / 24 / 24 h (at air humidity of 75–80 %; longer at 60–70 %) |
| Key properties | density 1.20 g/cm3; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C |
| Consumption | not more than 0.15 kg/m2 per coat |
| Shelf life | 6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | the grade is not listed in the SGRs reviewed on qtp.ru (epoxy compounds 2024, polyurethane compounds 2015, epoxy enamels 2018); the manufacturer is the same — OOO "KTP", Noginsk; test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Chemical-resistant clear epoxy varnish for a finish over epoxy coatings and pore sealing in highly filled systems.
Clear solvent-free epoxy compound for priming, repair mortars, bonding and highly filled coatings.
Clear solvent-free epoxy varnish for a chemical- and wear-resistant finish over epoxy coatings.
Polymer-hybrid composition with 700 % elongation — a membrane under rigid coatings, a chemical-resistant sealant and waterproofing.
Economical solvent-free epoxy primer for epoxy and polyurethane systems, filler coats and hygienic coving.
Chemical-resistant smooth solvent-free self-levelling epoxy coating for concrete, plaster, epoxy fillers and asphalt indoors.