Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 1040 AS — chemical-resistant conductive epoxy self-levelling floor
QTP

QTP® 1040 AS — chemical-resistant conductive epoxy self-levelling floor

Epoxy floors

Protecting electronic equipment against discharges of up to 5 kV is the purpose of this self-levelling finish. The epoxy compound with enhanced chemical resistance is applied only over QTP 3010 AS static-conductive primer. Vertical electrical resistance is below 10⁶ Ω (to GOST IEC 61340-4-1-2017), and Taber abrasion is 32 mg. It is suitable for industrial, public and residential buildings with ESD control requirements.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typeepoxy floors
Useantistatic/conductive, chemically resistant, production workshops, retail and public buildings
Basetwo-component pigmented conductive epoxy compound with enhanced chemical resistance, solvent-free
Colourtintable
Packaging22 kg kit: component A 20 kg (20 l pail) + component B 2 kg (6 l pail)
Application temperaturesubstrate +10…+30 °C (3 °C above the dew point); air +10…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days
Key propertiesvertical electrical resistance Rv <10^6 Ω (at 2.0 mm over QTP 3010 AS primer); compressive strength 68 MPa; flexural strength 50 MPa; tensile strength 27 MPa; impact strength 40 kJ/m2; Shore D hardness 86; Taber abrasion 32 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C
Layer thickness2.0 mm (for the stated Rv)
Shelf life6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
StandardsSGR RU.18.UTs.02.015.E.000127.06.24 dated 03.06.2024 (epoxy compounds for industrial floors, TU 20.30.22-019-28912903-2023; grade listed in the annex); electrical resistance to GOST IEC 61340-4-1-2017; test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP