Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 2161 AS — conductive matt polyurethane varnish for ESD areas
QTP

QTP® 2161 AS — conductive matt polyurethane varnish for ESD areas

Sealers and topcoats

This coloured matt water-based polyurethane varnish provides the finish coat for ESD-protected areas. It is UV-resistant and suitable for renovating antistatic floors and as a static-dissipative layer. Electrical resistance is below 1·10⁴ Ω; continuous heat resistance is up to +75 °C. Foot traffic is possible after 10 h at +20 °C.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typesealers and topcoats
Useantistatic/conductive, production workshops
Basetwo-component coloured matt conductive water-based polyurethane varnish; solids content 34 %
Colourcoloured, matt
Packaging11.0 kg kit: component A 10.0 kg (20 l pail) + component B 1.0 kg (1 l bottle)
Application methodUV-resistant floor finish in ESD-protected areas; renovation of antistatic floors; static-dissipative coating
Application temperaturesubstrate +10…+30 °C; air +15…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 15 / 10 / 8 h; light load after 5 / 3 / 2 days; full load after 7 / 5 / 5 days
Key propertieselectrical resistance Rv <1·10^4 Ω; heat resistance: continuous +75 °C, up to 7 days +85 °C, up to 12 h +100 °C; pot life 60 min
Shelf life6 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
Standardsthe grade is not listed in the SGRs reviewed on qtp.ru (epoxy compounds 2024, polyurethane compounds 2015, epoxy enamels 2018); the manufacturer is the same — OOO "KTP", Noginsk; electrical resistance to GOST IEC 61340-4; test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP