Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Self-levelling Floor BR — odourless solvent-free PU self-levelling floor
ELAKOR

Elakor-PU Self-levelling Floor BR — odourless solvent-free PU self-levelling floor

Polyurethane floors

The compound contains no solvent — solids content 100 % — and does not smell during application, so the floor can be installed in operating production facilities and enclosed premises. It is used to make classic, industrial and quartz-filled self-levelling coatings on concrete, metal and wood primed with “Elakor-PU” materials. Base colours are greys RAL 7035 and 7040, the coating is glossy; compressive strength is 42 MPa, Taber abrasion 19 mg, pouring at +5…+22 °C.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, chemically resistant, wet rooms
Basetwo-component polyurethane compound without solvent (solvent-free), odourless during application; composition: urethane prepolymers, polyols, pigments and fillers, functional additives
Colourbase colour: RAL7035, 7040 (greys); other colours – to order, tinting to RAL; gloss
PackagingComponent “A” 20 kg + Component “B” 4 kg = Kit 24 kg
Application methodProtection of concrete surfaces; classic, industrial, quartz-filled self-levelling coatings on concrete, metal, wood. On surfaces primed and levelled with “Elakor-PU” materials. Squeegee rakes, notched and flat trowels, brushes, rollers. Surface moisture not more than 4 wt%, relative air humidity not more than 80%, dew point +3°C.
Application temperaturematerial from +15°C to +20°C
Curingpot life of the mix on the surface at (20±2)°C at least 30 min; drying to degree 3 at (20±2)°C – not more than 10 h
Key propertiesA:B ratio by weight 5:1; solids content 100%; mix density 1.42 kg/l; service temperature -60°C ... +80°C, short-term (up to 30 min) up to +140°C; compressive strength 42 MPa (GOST 4651-2014, ISO 604:2002); film tensile strength at least 12 MPa; elongation 30%; impact strength (U-2M) 100 cm; flexibility (bend test) not more than 2 mm; Shore D at 28 days 53-58; Taber abrasion SC-10, 1000 g, 28 days – 19 mg; gloss at 60° 87-90 (gloss); conventional lightfastness (onset of chalking) at least 100 h; fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Layer thicknesstotal coating thickness 2.0-2.5 mm
Consumption2 kg/m² for the finishing coat with a total coating thickness of 2.0-2.5 mm
Shelf lifestore and transport at temperatures from 0°C to +25°C
StandardsCertificate of conformity (fire safety) “Elakor-PU 2K”; ROSTEST letter “Elakor-PU 2K”; MOSGOSEKSPERTIZA letter on the use of “Elakor-PU 2K” at garage facilities

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR