Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Grunt-2K/60 — deep-penetrating epoxy primer
ELAKOR

Elakor-ED Grunt-2K/60 — deep-penetrating epoxy primer

Floor primers

This solvent-containing compound — 60 % non-volatiles in the mix — penetrates deep into concrete and prepares it for epoxy floors of any type. Separately, it is used as an epoxy impregnation for concrete and also primes stone, brick, slate, wood, fibreboard, particleboard and cement-bonded particleboard. Pot life is at least 40 minutes, service from −30 to +80 °C with short-term heating up to +140 °C, indoors and under a canopy.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typefloor primers
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, wet rooms
Basetwo-component low-viscosity epoxy primer with solvent (non-volatiles 60%); composition: epoxy resin, solvent, hardener, functional additives
Packaging“A” + “B” = Kit 20 kg + 5 kg = 25 kg
Application methodDeep priming of concrete under epoxy floors of all types; epoxy impregnation of concrete (stand-alone coating); priming of stone, brick, slate, wood, fibreboard, particleboard, cement-bonded particleboard. Surface moisture not more than 4 wt%, relative air humidity not more than 80%, surface temperature 3°C above the dew point; on the lowest floors – waterproofing against rising damp; preparation – removal of laitance/weak layer by grinding or shot blasting. Rollers, brushes, flat metal or rubber trowel.
Application temperatureair and surface: from +5°C to +25°C; material: from +15°C to +20°C
Curingpot life at 20.0±2.0 °C at least 40 min; drying to degree 3 not more than 8 h
Key propertiesA:B ratio by weight 4:1 (may vary); non-volatiles 60%; mix density 1.00 kg/l; service temperature -30...+80°C continuous, short-term for up to 60 min up to +140°C; adhesion to concrete (tested up to M650 (B50)) – failure in concrete; adhesion to glass not more than 1 point; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR