Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ELAKOR

Elakor-PU Lyuks Emal-V for Floors — water-based vapour-permeable floor paint

Polyurethane floors

This water-based two-component paint forms a matt vapour-permeable coating with a gloss of 5–10 % and serves as the finishing coat for lightfast polyurethane-cement quartz-filled floors. It can be applied to concrete of at least M200 as early as 14 days after placing, as well as to sand concrete, brick, stone and wood: substrate moisture, air humidity and dew point are not limited. The coating can be walked on after a day, full chemical load after 14 days; frost resistance at −40 °C is at least 75 cycles, lightfastness 7 (“excellent”).

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Useoutdoor areas, chemically resistant
Basematt water-based two-component polyurethane paint, lightfast, weather-resistant, vapour-permeable; acrylic-urethane prepolymers, pigments, fillers, functional additives, water
Colourcoloured; matt, gloss at 60° 5-10%
PackagingComp. “A” 19.8 kg + Comp. “B” 1.8 kg = Kit 21.6 kg (PP canisters)
Application methodLightfast vapour-permeable paint-on coatings; finishing coat (sealing) of lightfast polyurethane-cement quartz-filled coatings (PTs KNP). Substrates: concrete, sand concrete, brick, slate, stone; wood, plywood, particleboard, cement-bonded particleboard. Concrete not lower than M200, cured for at least 14 days; surface moisture is not limited (no puddles or condensation); relative air humidity and dew point are not limited. Brushes or rollers (5-8 mm nap); paint-on coatings – 2 coats.
Application temperaturesurface and air: optimum +15°C…+23°C; permissible +5°C…+30°C; materials: optimum +15°C…+20°C, permissible 10°C…+25°C
Curingpot life at +20°C at least 60 min; drying to degree 3 at +20°C, relative air humidity 65% not more than 1 h; drying between coats at +15…25°C – 16-12 h; after application at +15…25°C: foot traffic – 1 day, full mechanical load – 7 days, full chemical load – 14 days
Key propertiesmix viscosity VZ-4 60-80 s; solids content at least 60%; density 1.29 ±0.01 kg/l; service temperature range from -40°C to +80°C; water absorption not more than 4%; film tensile strength at least 12 MPa; elongation at least 20%; impact (U-2M) 60 cm; Shore D at 28 days 65-75; flexibility not more than 2 mm; gloss at 60° 5-10%; lightfastness 7 (excellent) per ISO 9370-2017; Taber abrasion CS-10, 1000 g, 28 days – 24 mg; resistance to climatic factors 1 point (GOST 9.401 method 2); frost resistance at -40°C at least 75 cycles; fire hazard class KM1; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumptionpaint-on coatings: 2 coats, 100-130 g/m² per coat; sealing coat of quartz-filled coatings: 1-2 coats, up to 600 g/m² per coat
Shelf life8 months in the manufacturer's original packaging; store and transport at temperatures from +5°C to +25°C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR