ELAKOR
Elakor-ED Antistatic Self-levelling Floor SK PROF (AST-7, AST-6) — epoxy floor
Professional version of the epoxy antistatic self-levelling floor in AST-7 and AST-6 modifications for cleanrooms and electronics.
Price on request
ELAKOR
Elakor-PU Lyuks Lak-R Semi-Gloss — semi-gloss lightfast polyurethane varnish
The semi-gloss varnish from the Lyuks line is two-component, colourless, lightfast and UV-resistant. The film withstands a tensile stress of at least 40 MPa, has Shore D hardness of 70–74 and Taber abrasion of 5 mg, and works from −60 to +100 °C with short-term heating up to +150 °C. The coating is resistant to water, salt and alkali solutions, acids up to 10–20 %, oils, fats and solvents; availability of this item is confirmed on request.
Specifications
| Manufacturer | Elakor — OOO “TEOKHIM-PROM”, Moscow Region |
|---|---|
| Type | varnishes and topcoats |
| Use | chemically resistant |
| Base | two-component polyurethane varnish, lightfast, UV-resistant |
| Colour | transparent, colourless; semi-gloss |
| Packaging | Comp. “A” + Comp. “B” = Kit: 8 kg + 1 kg = 9 kg; 16 kg + 2 kg = 18 kg |
| Curing | drying to degree 3 at +20°C not more than 10 h |
| Key properties | A:B ratio 8:1; mix viscosity VZ-4 10-12 s; solids content at least 32; density 0.92 kg/l; service temperature range from -60°C to +100°C (up to 30 min – up to +150°C); water absorption not more than 0.1%; film tensile strength at least 40 MPa; elongation at least 8%; impact strength at least 100 cm; Shore D at 28 days 70-74; flexibility not more than 1 mm; Taber abrasion CS-10, 1 kg – 5 mg; chemical resistance: water; aqueous salt and alkali solutions up to concentrated; aqueous acid solutions up to 10-20%; oils and fats of all kinds; organic solvents, petrol, diesel fuel |
| Shelf life | 8 months in the manufacturer's original packaging; store and transport at temperatures from –30°C to +25°C |
| Standards | Certificate of conformity (fire safety); Certificate of conformity; Approval for use in children's and healthcare institutions |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ELAKOR
ELAKOR
Elakor-PU Lyuks Emal-V for Floors — water-based vapour-permeable floor paint
Matt water-based polyurethane floor paint without solvent odour, applied without controlling substrate moisture and dew point.
Price on request
ELAKOR
Elakor-PU Floor Sealant — polyurethane sealant for movement joints
Two-component polyurethane sealant for thermal and movement joints in concrete floors, elongation at least 400 %.
Price on request
ELAKOR
Elakor-ED Grunt-2K/100P — solvent-free pore-filling epoxy primer
Solvent-free epoxy primer for concrete, tile and stone under polymer floors, also a base for filler and skirtings with sand.
Price on request
ELAKOR
Elakor-ED Emal-2K/100 — solvent-free epoxy floor paint
Coloured solvent-free epoxy enamel for paint-on, decorative, quartz and anti-slip floors in sales halls and workshops.
Price on request
ELAKOR
Elakor-PTs Grunt-AST (Antistatic Vapour-Permeable Primer) — antistatic underlayer
Vapour-permeable antistatic polyurethane primer for conductive Elakor-PTs T1/B AST polyurethane-cement coatings.
Price on request