Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Self-levelling Floor White — white decorative epoxy floor
ELAKOR

Elakor-ED Self-levelling Floor White — white decorative epoxy floor

Epoxy floors

This white compound is made for “designer” interiors and is distinguished by perfect flow. It is poured over levelled, primed concrete, sand concrete and cement screeds with a surface temperature difference of not more than 4 °C, spread with a notched squeegee rake and rolled with a spiked roller. The coating is used indoors, including fitness centres, gyms and swimming pools; Shore D hardness is 73–75, permissible application temperature from +5 to +25 °C.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeepoxy floors
Useretail and public premises, wet rooms, chemically resistant, decorative
Basewhite two-component epoxy compound with perfect flow; composition: epoxy resin, hardener, pigments, fillers, functional additives
Colourwhite
Packaging“A” + “B” = Kit 22 kg + 4.4 kg = 26.4 kg
Application methodDecorative “designer” white self-levelling coatings on concrete, sand concrete, cement levelling screeds (surface levelled, primed, pores closed). Relative air humidity not more than 80%, surface 3°C above the dew point, surface temperature difference not more than 4°C. Squeegee rake with a notched blade or notched trowel, roll with a spiked roller.
Application temperaturesurface and air: optimum +15°C…+22°C; permissible +5°C…+25°C; materials: optimum +15°C to +20°C, permissible +15°C…+25°C
Curingpot life on the surface at (20±2)°C at least 30 min; drying to degree 3 not more than 8 h
Key propertiesA:B ratio by weight 5 : 1 (may vary); solids content 100%; density 1.32±0.02 kg/l; Shore D hardness (28 days) 73-75; Taber abrasion SC-10, 1.0 kg, 28 days – 12 mg; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption1.32 kg (A+B) per 1 m² at a layer thickness of 1 mm; minimum consumption for “perfect” flow 1.5 kg/m²
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR