Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Repair Compound — epoxy levelling compound for floor preparation and repair
ELAKOR

Elakor-ED Repair Compound — epoxy levelling compound for floor preparation and repair

Concrete floor repair

This filled repair compound levels concrete, sand concrete, levelling compounds, stone and brick before installing epoxy and polyurethane floors, fills cavities, potholes and cracks, and forms slopes. It can be additionally filled with quartz or sand, with crushed stone for large defects, and with marble or dolomite for non-sparking coatings. Colour is approx. RAL 7013, like wet concrete, Shore D hardness 93–97, working time of the batch not more than 20 minutes.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeconcrete floor repair
Basetwo-component epoxy compound with filler; composition: epoxy resin, hardener, filler, functional additives
Colourapprox. RAL7013 (colour of wet concrete)
Packaging“A” + “B” = Kit 27 kg + 3 kg = 30 kg
Application methodLevelling of the surface when installing polymer floors of any type (epoxy, polyurethane), filling of cavities, potholes, cracks, “smoothing”, forming slopes. Substrates: concrete, sand concrete, levelling compounds, stone, brick. Surface moisture not more than 4 wt%, relative air humidity not more than 80%, surface temperature 3°C above the dew point; on the lowest floors – waterproofing against rising damp; preparation – removal of laitance/weak layer by grinding or shot blasting. Primer – Elakor epoxy primers, wait 12-16 h, but not more than 48 h. Can be filled with quartz/sand (for large defects also with crushed stone); for non-sparking coatings – marble or dolomite. Spread with a trowel; working time not more than 20 minutes.
Application temperatureair and surface: from +5°C to +25°C; material: from +10°C to +20°C
Curingpot life at 20.0±2.0 °C at least 30 min; drying to degree 3 not more than 8 h
Key propertiesA:B ratio by weight 9 : 1 (may vary); non-volatiles 100%; mix density 1.65±0.02 kg/l; Shore D hardness (28 days) 93-97; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR