ELAKOR
Elakor-PU Emal-2K/100 Textured — solvent-free textured polyurethane enamel
Two-component polyurethane enamel without solvents or odour for textured coloured floor coatings in a single coat.
Price on request
ELAKOR
Elakor-ED Binder-2K/T Epoxy Compound — binder for stone carpet
This two-component compound binds coloured quartz sand, pebbles, gravel, granite and marble screenings into a framework coating of the “stone carpet” type. Such coatings are made indoors and outdoors — on paths, paved areas and in decorative elements. The substrate is concrete or sand-cement screed of at least M200, brick or stone, primed with epoxy primer; the laying time of the mix is not more than 40 minutes, film lightfastness 5 (“good”).
Specifications
| Manufacturer | Elakor — OOO “TEOKHIM-PROM”, Moscow Region |
|---|---|
| Type | floor material |
| Use | outdoor areas, decorative |
| Base | thixotropic two-component epoxy compound without organic solvents (binder for stone carpet, stone chippings) |
| Colour | film hard, flexible, glossy, uniform |
| Packaging | “A” + “B” = Kit 20 kg + 9.2 kg = 29.2 kg |
| Application method | Framework coatings and products with fillers (coloured quartz sand, pebbles, gravel, granite and marble screenings): “stone carpet”, paths and areas. Substrate: concrete or sand-cement screed at least M200, brick, stone (metal, wood – after consultation); surface primed with epoxy primer; surface 3°C above the dew point. Mix A+B, add filler until fully wetted, spread immediately; laying time not more than 40 min. |
| Application temperature | air and surface: from + 5 to + 22°C; binder and filler: from + 10 to + 20°C |
| Curing | drying time to degree 3 at 20°C – not more than 8 hours |
| Key properties | A : B ratio 100 : 45; density 1.06; non-volatiles 100%; adhesion to glass 1 point; film resistance to static exposure to water at least 48 hours, xylene at least 48 hours, butyl acetate at least 24 hours; lightfastness on the “Lightfastness Scale” – 5 (good) |
| Consumption | per 1 part by weight of Binder – 15-25 parts by weight of Filler (depending on the fraction) |
| Shelf life | 12 months in the manufacturer's original packaging; store and transport at temperatures from 0°C to 25°C |
| Standards | Fire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED” |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ELAKOR
ELAKOR
Elakor-ED Antistatic Self-levelling Floor (AST-7, AST-6) — epoxy antistatic floor
Epoxy antistatic self-levelling floor in AST-7 and AST-6 versions for server rooms, operating theatres, laboratories and explosion-hazard production.
Price on request
ELAKOR
Elakor-PU Lyuks Lak-R/UFB Semi-Matt — semi-matt varnish with UV filter
Semi-matt transparent polyurethane varnish with a UV filter for protecting polymer floors from ultraviolet and wear.
Price on request
ELAKOR
Elakor-PU Grunt-2K/40 — maximum-depth polyurethane impregnation
Two-component polyurethane primer with 40 % solids content for hardening weak and porous concretes under polymer floors.
Price on request
ELAKOR
Elakor-PU Lyuks Emal Matt — matt lightfast polyurethane enamel
Matt polyurethane enamel with a gloss of 3.0–3.5 % for floors, walls and tanks, resistant to ultraviolet and water.
Price on request
ELAKOR
Elakor-PU Lyuks Emal-T — thixotropic weather-resistant polyurethane enamel
Thixotropic polyacrylate-urethane enamel for exterior and interior protective coats on concrete, metal and polymer coatings.
Price on request