Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Antistatic Impregnation — epoxy impregnation with carbon nanotubes
ELAKOR

Elakor-ED Antistatic Impregnation — epoxy impregnation with carbon nanotubes

Concrete impregnations and hardeners

The conductivity of the impregnation is provided by single-walled carbon nanotubes, and the compound itself contains no solvents and is odourless. It is used to treat concrete, magnesia concrete, tile, stone, brick and wood; according to the technical data sheet, specific surface resistance is not more than 10⁷ Ω, volume resistance not more than 10⁶ Ω at 100 V, and conductive impregnations are applied only on concrete. The coating is non-sparking, gloss 90–95 %, Shore D hardness 80–85, fire hazard class KM1.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeconcrete impregnations and hardeners
Useproduction workshops, warehouses and logistics, chemically resistant, antistatic/conductive
Basetwo-component electrically conductive solvent-free epoxy compound; composition: epoxy resin, hardener, additives, conductive agent
Colourcomp. A – transparent grey liquid, comp. B – from yellow to light brown
Packaging“A” + “B” = kit 16 kg + 4 kg = 20 kg
Application methodAntistatic impregnation of floors, walls, ceilings, columns, structures. Substrates: concrete, sand concrete, terrazzo, concrete tile, magnesia concrete, stone, slate, brick; wood, plywood, particleboard, cement-bonded particleboard. Static-dissipative impregnations; conductive ones – only on concrete. Rollers (12-14 mm nap) or brushes; 1-2 coats depending on porosity. Residual surface moisture not more than 4 wt%; surface 3°C above the dew point.
Application temperaturesurface and air: from +5 to +25°C; material temperature: from +15 to +20°C
Curingpot life of the mix on the surface at (20±2)°C at least 30 min; drying to degree 3 at (20±2)°C not more than 8 h
Key propertiesA:B ratio by weight 4:1; solids content at least 60%; density 1.00±0.02 kg/l; specific surface electrical resistance (Rs) at V=100 V not more than 10^7 Ω; specific volume resistance (Rv) at V=100 V not more than 10^6 Ω; adhesion to concrete M350 (B25) – failure in concrete; adhesion to glass not more than 1 point (GOST 15140); Shore D at 28 days 80-85; flexibility (bend test) at least 5 mm; specific weight loss by wear (GOST 20811, method B) not more than 12 g/m²; Taber abrasion SC-10, 1.0 kg, 28 days – 14-16 mg; gloss at 60° 90-95%; service temperature -30 ... +80°C, short-term (up to 60 min) up to +140°C; resistance to static exposure to water and xylene at least 48 h, butyl acetate at least 24 h; fire hazard class KM1; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption1-2 coats, 100-200 g/m² per coat
Shelf lifestore and transport at temperatures from +5° to +25°C
StandardsFire safety certificate “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR