AKVASTOP
AKVASTOP SVG waterstop — joint seal for diaphragm walls
Profile seal for construction joints in diaphragm walls of hydraulic and underground structures; water pressure up to 0.33 MPa.
Price on request
AKVASTOP
AKVASTOP PNR swelling rubber profile — seal for construction joints
PNR is a hydrophilic rubber profile under a protective lacquer: the lacquer breaks down in the alkaline environment of concrete or on prolonged contact with water, after which the rubber swells and locks the joint. The PNR 20×4 Standard grade (green) swells by at least 500 % and withstands 14 atm, PNR 20×4 Econom (blue) — 300 % and 10 atm, and there is also a round PNR Ø8. The profile is used in construction joints of foundations, basements, pools and hydraulic structures, in joints of collector tunnels, manholes and tunnel lining segments, and at utility penetrations; installation is possible at temperatures from −40 to +50 °C.
Specifications
| Manufacturer | AKVASTOP — OOO “Akvabarier” |
|---|---|
| Type | waterstops and swelling profiles |
| Use | foundations and basements, tanks and pools, hydraulic structures and dams, tunnels and metro, joints and junctions |
| Base | hydrophilic rubber with a protective lacquer (the lacquer breaks down in the alkaline environment of concrete or on prolonged contact with water) |
| Colour | Standard — green; Econom — blue |
| Packaging | 10 m coils in sealed polyethylene bags; box of 5 coils (50 m) |
| Application method | laid in the central part of the section, no closer than 50 mm to any face; clean the substrate of dust, dirt, standing water and ice; fix with adhesives, mastics or sealants, in winter additionally with metal mesh and dowels every 150–200 mm; butt-jointed |
| Application temperature | −40…+50 °C |
| Key properties | grades PNR 20×4 Standard, PNR 20×4 Econom, PNR Ø8; Shore A hardness 55; nominal tensile strength at least 6.0 MPa; density 1.2 g/cm3; elongation at least 300 %; free volumetric swelling at least 500 % (Standard) / 300 % (Econom); resistance to hydrostatic pressure 14 atm (Standard) / 10 atm (Econom) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by AKVASTOP
AKVASTOP
AKVASTOP DZS waterstop — tie-in waterstop for connecting structures
U-shaped PVC-P tie-in waterstop for the expansion joint between a new and an existing structure; joint tension up to 150 mm.
Price on request
AKVASTOP
AKVASTOP DR waterstop — repair waterstop for expansion joints
Repair waterstop for restoring the tightness of leaking expansion joints in operating underground structures.
Price on request
AKVASTOP
AKVASTOP KhV waterstop — internal waterstop for construction joints
Internal waterstop for construction joints in foundations, tunnels and tanks; permissible water pressure up to 0.98 MPa.
Price on request
AKVASTOP
AKVASTOP PNB swelling bentonite profile — strip for construction joints
Bentonite strip on butyl rubber for construction joints, junctions and utility penetrations; resists water pressure up to 18 atm.
Price on request
AKVASTOP
AKVASTOP KhVN waterstop — internal waterstop with a swelling cord
Internal PVC-P waterstop with a swelling rubber cord for construction joints and floor-to-wall junctions; water pressure up to 0.97 MPa.
Price on request