AKVATRON
AKVATRON-8P — hydraulic plug with extended setting time
Hydraulic plug for sealing active leaks in basements, tanks and tunnels with longer setting: from 30 s to 5 min.
Price on request
AKVATRON
AKVATRON-1 — thixotropic repair and waterproofing compound
AKVATRON-1, a fine-grained rapid-hardening thixotropic concrete mix on special cements with controlled expansion and polymer fibre, serves for the repair and waterproofing of vertical and overhead surfaces. It is used to fill cracks, stable joints, butt joints and utility entries with an opening from 20 mm, for patch repair of floors and for monolithic sealing of joints in precast concrete. The compound reaches a compressive strength of at least 30 MPa and has adhesion to concrete from 2.0 MPa, watertightness W12 and frost resistance F300.
Specifications
| Manufacturer | AKVATRON — OOO “Akvatron-BKhK”, Biysk |
|---|---|
| Type | coating waterproofing |
| Use | joints and junctions, leak repair, interior spaces |
| Base | fine-grained rapid-hardening dry concrete mix of thixotropic type on special cements with controlled expansion, with polymer fibre |
| Colour | grey |
| Packaging | polyethylene film bags of 5 kg |
| Application method | repair and waterproofing of vertical and overhead surfaces in layers of 5–40 mm, manual or machine application; cracks, stable joints, butt joints, junctions, utility entries with an opening from 20 mm; patch repair of floors; grouting of floor–wall gaps; monolithic sealing of joints in precast concrete |
| Curing | initial set not earlier than 20 min, final set not later than 180 min |
| Key properties | compressive strength at least 30 MPa; flexural tensile strength at least 6 MPa; adhesion to concrete at least 2.0 MPa; watertightness at least W12; frost resistance at least F300; linear expansion at least 0.06 %; bulk density 1.5±0.1; mixing water 0.13–0.20 l/kg |
| Layer thickness | 5–40 mm |
| Shelf life | 24 months from the day of manufacture |
| Standards | GOST 31357-2007, GOST 31189-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by AKVATRON
AKVATRON
AKVATRON-3 — repair and waterproofing compound, grades L and T
Non-shrink repair mix in two grades, pourable and thixotropic, for bridge slabs, floor slabs, foundations, pools and tanks.
Price on request
AKVATRON
VODOBLOK — cement-based penetrating waterproofing mix
Dry penetrating mix for waterproofing and repairing concrete and stone in basements, pools and tanks; applied at +5…+40 °C.
Price on request
AKVATRON
AKVATRON-8 — hydraulic plug for stopping active leaks
Rapid-setting hydraulic plug for stopping active leaks in cracks and joints; sets in 30 s – 3 min and works under water.
Price on request
AKVATRON
AKVATRON-12 — waterproofing admixture for concrete mix
Crystal-forming admixture for primary waterproofing of cast-in-place concrete and precast units; raises watertightness by at least 2 steps.
Price on request
AKVATRON
AKVATRON-6Sh Shovny — penetrating mix for sealing joints and cracks
One-component joint mix combining mastic elasticity with penetrating waterproofing properties for joints and cracks under cyclic deformation.
Price on request