Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
IZOLEP-arktik — epoxy primer-enamel for ice conditions and hydraulic structures
VMP

IZOLEP-arktik — epoxy primer-enamel for ice conditions and hydraulic structures

Primer-enamels

A highly filled epoxy primer-enamel for structures operating in ice and water: the underwater part of ice-class vessels and icebreakers, sheet-pile and quay walls, supports of oil-loading berths, locks, offshore structures and the variable water level zone. The coating is resistant to abrasive wear, has a low coefficient of friction against ice, withstands down to −70 °C and allows cathodic protection. It is applied only with plural-component units with separate feed and heating of the components, and works on its own or under VINIKOR-marin AF antifouling enamels and a POLITON-UR (UV) finish.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeprimer-enamels
Usemarine and port structures, steel structures
Baseepoxy, two-component (base and hardener); high solids (at least 95 %)
Colourred-brown; white, black, red or other colours by agreement with the customer
Packagingkit: base and hardener in metal pails and cans (depending on the kit weight)
Application methodairless spray with plural-component units with separate feed and heating of the components (e.g. Graco XP70, Hydra-Cat): ratio 2:1 by volume, component temperature at the gun outlet 40–50 °C, nozzle 0.023–0.027″, pressure at least 21 MPa, without thinning; brush — for repairs and small areas (thinner SOLV-EP max. 7 % by weight)
Application temperatureair from +5 to +40 °C, relative humidity up to 80 %; surface at least 3 °C above the dew point; temperature of the base, hardener and primer-enamel not below +20 °C
Dryingto degree 1 — no more than 5 h, to degree 3 — no more than 6 h at 23 °C; maximum before overcoating with POLITON-UR (UV) enamel — no more than 7 days; pot life — at least 20 min at 20 °C, at least 5 min at 45 °C
Key propertiesvolume solids — 95±2 %, density — 1.50±0.1 g/cm³, service temperature — down to −70 °C (Far North and Arctic), resistance to fresh, sea and mineralised water, spills of solutions of salts, acids, alkalis, crude oil and petroleum products, detergents, increased resistance to abrasive wear, low coefficient of friction against ice, may be used with cathodic protection
Compatible materialsstand-alone coating or a system with VINIKOR-marin AF, VINIKOR-marin AF/S antifouling enamels and POLITON-UR (UV) finish enamel; if the interval is exceeded — intermediate coat IZOLEP-pro
Shelf lifebase — 24 months, hardener — 12 months from the date of manufacture
StandardsTU 20.30.12-127-12288779-2020; type approval certificate of the Russian Maritime Register of Shipping (RS) No. 23.44.01.08964.120; Russian River Register certificate No. ROSS RU.RO00.N00422; clause 6.5.3, Part XIII of the “Rules for the Classification and Construction of Sea-Going Ships” (RS, 2023)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP