VINIKOR primer-enamel — vinyl-epoxy, for steel, galvanised steel and aluminium
Vinyl-epoxy primer-enamel for steel structures, bridges and ships; low flame spread, applied down to −10 °C.

ALUMOTERM is a one-pack silicone varnish with aluminium powder that forms a smooth, glossy silver coating. It is designed for long-term service at temperatures up to 350 °C (short-term up to 400 °C) on equipment and steel structures in oil and gas and power. It is applied as a finish over TSINOTERM or on its own; for optimum properties the coating is heated to 150 °C. Work is carried out at air temperatures from −15 °C, and the material is included in the register of JSC NK Rosneft.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | heat-resistant coatings |
| Use | steel structures, equipment, oil and gas, power industry |
| Base | heat-resistant silicone varnish with aluminium powder; one-pack |
| Colour | silver, glossy, smooth |
| Packaging | metal pails or metal cans |
| Application method | airless spray (nozzle 0.011–0.017″, 10–15 MPa), air spray, brush, roller; thinner 646 or xylene up to 15 % by weight (working viscosity 14–18 s) |
| Application temperature | air from −15 to +40 °C, relative humidity up to 85 % |
| Drying | to degree 3 — no more than 30 min at 20 °C; over TSINOTERM — not earlier than 2 h; for optimum properties — heating to 150 °C with a hold of at least 3 h; before service in an aggressive gaseous environment — heat curing |
| Key properties | heat resistance of the coating — 350 °C; long-term service up to 350 °C (short-term up to 400 °C), non-volatile matter by weight — 39–44 %, density — 1.0–1.1 g/cm³, adhesion (GOST 31149) — max. 1 point, impact strength — at least 50 cm, coating class (GOST 35094) — IV |
| Compatible materials | TSINOTERM + ALUMOTERM; may be used as a stand-alone coating |
| Shelf life | 6 months from the date of manufacture |
| Standards | TU 20.30.12-020-12288779-2026; register of JSC NK Rosneft |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Vinyl-epoxy primer-enamel for steel structures, bridges and ships; low flame spread, applied down to −10 °C.
Epoxy primer-enamel for bridges, pipelines and steel structures, applied over tight rust; C1–C5 and CX per GOST 34667.
One-component direct-to-metal primer-enamel for ships, railway wagons and steel structures; applied in frost down to −25 °C.
Antistatic coating for tanks and pipelines for petrol, diesel fuel and aviation fuel; approved by FSUE GosNIIGA.
Moisture-curing zinc-rich primer for steel structures, bridges and marine structures, applied at air temperatures from −15 °C.
Powder material for pipe plants, sprayed as a second layer over uncured VM-6233R onto a heated pipe.