Elcon
KO-8111 Elcon — heat-resistant enamel up to +700 °C for steam, oil and gas pipelines
Silicone enamel for pipelines, chimneys, heating pipes and waste incineration furnaces heated up to +700 °C.
Price on request
Elcon
KO-811 Elcon — heat-resistant enamel up to +400 °C per GOST 23122-78
It is manufactured to GOST 23122-78 and is suitable not only for steel but also for aluminium and titanium surfaces of metal structures and equipment. The coating works from −60 °C to +400 °C and holds for at least 5 h at (440±10) °C; flexibility in bending is not more than 3 mm. The palette is limited to five colours: black, red-brown, grey, silver-grey and green; the enamel is applied by air spray in 2–3 cross coats without primer.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Use | steel structures, equipment |
| Base | one-component enamel on modified silicone resin with a solution of pentaphthalic resin; aromatic solvents |
| Colour | black, red-brown, grey, silver-grey, green (up to 400 °C); tinting to RAL K5 |
| Packaging | 25 kg |
| Application method | air spray (working viscosity 12–17 s); 2–3 cross coats with drying to “tack-free” 0.5–2 h; surface preparation St 3, degreasing; surface at least 3 °C above the dew point |
| Application temperature | from −30 °C to +40 °C (air and substrate); relative air humidity not more than 80 % |
| Drying | coating drying 30 min at (20±2) °C, final — at least 24 h; full cure on heating in service; transport and installation — not earlier than 3 days |
| Key properties | Heat resistance: from −60 °C to +400 °C, Heat resistance of the coating at (440±10) °C: at least 5 h, Non-volatile matter by weight: red 30–35 %, green and black 39–45 %, Flexibility in bending: not more than 3 mm, Resistance to static exposure at 20 °C: water 24 h, petrol 2 h |
| Compatible materials | no priming required |
| Shelf life | 12 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | GOST 23122-78 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
KhV-0278 Elcon — anticorrosion primer-enamel over rust
One-component primer-enamel for steel structures and equipment, applied over tightly adherent rust at temperatures down to −20 °C.
Price on request
Elcon
KO-828 Elcon — heat-resistant enamel for low-carbon steel parts
Silicone enamel for low-carbon steel parts over phosphated and non-phosphated surfaces, heating up to +700 °C.
Price on request
Elcon
Elcon Epoxy epoxy primer-enamel — two-component, for aggressive environments
Two-component epoxy primer-enamel for steel structures, tanks, bridges and ports; applied down to −10 °C, 20-year service life with Elcon PU.
Price on request
Elcon
Elcon AL anticorrosion weather-resistant enamel — topcoat with flake aluminium
Silver barrier enamel with flake aluminium for steel structures and equipment; topcoat over Elcon Zintech zinc primer.
Price on request
Elcon
KO-8101 Elcon — heat-resistant enamel up to +700 °C for pipelines and the power industry
Silicone enamel for oil, steam and gas pipelines, chimneys and equipment; applied without primer, the black version withstands up to +700 °C.
Price on request