Elcon
KO-814 Elcon — silver enamel up to +400 °C in two versions
Silver silicone enamel up to +400 °C for steel structures and equipment: on KO-85 varnish with aluminium powder, or one-component.
Price on request
Elcon
OS-51-03 Elcon — organosilicate composition for heating network pipelines
For heating networks, Elcon produces OS-51-03 organosilicate composition on silicone varnish with alkyd resin, pigments and fillers. It is applied to the outer surface of pipelines in tunnels, utility collectors, technical crawl spaces, inside and outside buildings. There are versions up to +150 °C and up to +300 °C; the latter has electrical insulating properties — volume resistivity of at least 1·10¹⁴ Ohm·cm and dielectric strength of at least 10 kV/mm.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Base | organosilicate composition: silicone varnish, alkyd resin, pigments, fillers |
| Colour | black, red-brown, white, green, grey, blue, bright red, red, brown, light blue, beige, light grey, yellow; tinting to RAL K5 |
| Packaging | 25 kg |
| Application method | air spray (17–25 s), airless spray (30–45 s), roller or brush (25–35 s); 2–3 cross coats with drying to “tack-free” 0.5–2 h; preparation St 3 or Sa 2–Sa 2.5, degreasing with Elcon R |
| Application temperature | from −30 °C to +40 °C; relative air humidity not more than 80 % |
| Drying | to degree 3 — 2 h at (20±2) °C; full cure at least 24 h; installation — not earlier than 3 days |
| Key properties | Heat resistance: from −60 °C to +150 °C or up to +300 °C (two versions), Non-volatile matter by weight: at least 40 %, Adhesion: not more than 2 points (up to 150 °C), not more than 1 point (up to 300 °C), Volume resistivity (version up to 300 °C): at least 1·10¹⁴ Ohm·cm; after 24 h at 95 % humidity — at least 1·10¹² Ohm·cm, Dielectric strength (version up to 300 °C): at least 10 kV/mm |
| Compatible materials | no priming required |
| Shelf life | 24 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 2312-370-05763441-2001 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
Elcon PU weather-resistant polyurethane enamel — chemical-resistant topcoat
Two-component semi-gloss polyurethane enamel for tanks, bridges, equipment and concrete; topcoat over Elcon Epoxy, from −60 °C to +125 °C.
Price on request
Elcon
OS-12-03 Elcon — organosilicate composition up to +100, +150 or +300 °C
Organosilicate primer-enamel for metal, concrete, brick and facades in three versions: up to +100 °C, up to +150 °C and Elcon up to +300 °C.
Price on request
Elcon
KO-198 Elcon — weather-resistant silicone enamel for aggressive environments
Silicone enamel for steel structures and reinforced concrete under short-term exposure to acids and mineralised groundwater.
Price on request
Elcon
KO-870 Elcon — heat-resistant enamel up to +700 °C for steel structures and concrete
One-component silicone enamel for steel structures and equipment up to +700 °C, also suitable for concrete, brick and reinforced concrete.
Price on request
Elcon
KhV-0278 Elcon — anticorrosion primer-enamel over rust
One-component primer-enamel for steel structures and equipment, applied over tightly adherent rust at temperatures down to −20 °C.
Price on request